Replacement Brake Assemblies for 2019 Big Tex Gooseneck Trailer

Question

Question:

Trailer brake assembly for 2019 Big Tex 22gn trailer

asked by: Demetri

0

Expert Reply:

The Dexter Electric Brake Kit # 23-450-451 are the brakes you will need for your 2019 Big Tex 22GN with the 10,000lb Dexter axles. These are sold per axle so you will need 2 sets to replace all 4 of your brake assemblies. They are also sold individually as the Left # 23-450 and Right # 23-451.

expert reply by: Jameson C

0

Answer 1

Since your trailer has Dexter 10k axles the correct hub/drum you need is the part #8-430-5UC3 which comes with bearings, races and seal. Since you need shoes and magnets it would be easiest to go with new assemblies altogether like with the part…

view full answer...

Answer 2

The only option we have for 10k axle rated Dexter electric brake assemblies is the part #23-438-439 that you referenced. 10k trailer axles with drum brakes just aren't as popular as other options so there isn't as much competition for this…

view full answer...

Answer 3

The Dexter Electric Brake Kit #23-450-451 are the brakes you will need for your 2018 Big Tex 22GN with the 10,000lb Dexter axles. These are sold per axle so you will need 2 sets to replace all 4 of your brake assemblies. They are also sold…

view full answer...

Answer 4

Since we know your 2015 Big Tex has Dexter 10k axles the brake assembly set you need for each of your 10k Dexter axles is the part #23-450-451. This set of left and right assemblies is exactly what your Dexter axles need and they are self adjusting…

view full answer...

Answer 5

When you replace your Brakes #23-450-451 it is a good idea to inspect the bearings at that time. The bearings and races will only need to be replaced if they are damaged or grooved. A visual inspection of the seal will tell you if it leaking or you…

view full answer...

Answer 6

Realistically it is best to stick with a Dometic replacement thermostat for your Dometic setup. The #DMC79FR is the correct replacement for your 3316410.012. It may be possible to use a universal thermostat like the #CAM09221 you looked at but this…

view full answer...

Answer 7

The only digital thermostat we offer for Dometic RV Air Conditioners is the Replacement Single Zone Thermostat for Dometic RV Air Conditioners part #DMC79FR. If you feel yours is defective or not working properly then you can replace this using the…

view full answer...

Answer 8

If you can measure the width of your current brake assembly pads I can get you the correct brake assembly set for your Dexter 10,000 lb axles. If the pads are 3-3/8 inches wide you'd want the part #23-450-451 or if they are 4 inches wide…

view full answer...

Answer 9

The differences between the Electric Trailer Brake Kit w/ Dust Shields #AKEBRK-10 and the Dexter Electric Trailer Brake Assembly #23-450 are the different manufacturers and that the #AKEBRK-10 have dust shields, and the #23-450 does not. Also #23-450…

view full answer...

Answer 10

The plug that is included with the Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles part #RG04-230, 9,000-lb to 15,000-lb Dexter Axle part #RG04-270 and the 9,000-lb and 10,000-lb Dexter Axle part #RG04-300 is not available individually through…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Brake Assemblies for 2019 Big Tex Gooseneck Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching