Trailer Hitch Receiver, 7-Way, & Brake Controller For 2012 Chevy Express Passenger Van
Published 06/21/2023 >
Products Featured in This Question
Question:
A couple years ago etrailer assembled a “kit” for my new van. This “kit” included trailer hitch, brake controller, 7way plug and all of the wiring necessary for proper function of everything. Hoping you all can do that again for me. 2012 Chevy express 15 passenger. Heaviest duty hitch “Best” brake controller 7 way and flat plug All wiring Also as a side note I see you carry full length cargo mats. Do you carry any smaller type mats for between the benches? Thanks
asked by: Robert R
Expert Reply:
100% we can hook you up with the parts needed to add a hitch, wiring, and brake controller to your 2012 Chevy Express passenger van. For cargo mats we don't have anything able to cover the entire floor area, the best we can do is offer floor mats like the WeatherTech All-Weather Rear Floor Mats # WTW25GR.
I know those mats aren't what you wanted specifically but I thought it wouldn't hurt to at least give you the option if you wanted. As for the hitch, wiring and brake controller? That we got and here is exactly what you need:
- etrailer Trailer Hitch Receiver # e98861
- T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 55540
- Universal Installation Kit for Trailer Brake Controller # ETBC7
- Redarc Tow-Pro Liberty Brake Controller # RED24FR
- Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR
For the wiring, you will first install the 4-flat, which will activate your trailer's lighting functions, and you'll then plug that into the 7-way that comes with the # ETBC7, which also gives you the wiring, circuit breakers, and rest of the hardware needed for installation. The only other thing I recommend because you have a long passenger van is adding extra 10 gauge brake wire to make sure you have enough to run to the back of your van, and I'd add at least 10 feet of (sold by the foot) 10 Gauge, Brake Wire # 10-2-1.
Product Page this Question was Asked From
Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot
- Wiring
- Wire
- Jacketed Wire
- 2 Wire
- 10 Gauge
- Deka
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: Will Goodyear Endurance ST225/75R15 Fit 2024 Winnebago Access 26RL
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What do I Need to Go from Electric Brakes from Hydraulic with Surge Brake Actuator?
- Q&A: Recommended Brake Controller For An Itasca Ellipse Class A Motorhome
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Does Brake Output Wire on USCAR Harness Need To Be Hooked Up To Use Redarc Tow-Pro Link?
- Q&A: What Electric Brakes do I Need for My 10,000 Pound Axle with 7 Bolt Mounting Flange?
- Article: Trailer Lighting Requirements
- Q&A: Recommended Hitch for a 2016 E-450 Cab and Chassis
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers

