Replacement For 31 Inch Trailer Fenders

Question

Question:

I recently picked up an old Spartan Calssic XL boat trailer. Im looking at adding new fenders to it. Would Item # HP23VR work the best for it? They would be mounted between both step platforms. Measurement between them is roughly 31 1/4. I cant measure the old fender length cause they are beat to hell. I am guessing that they will work just want to make sure.

asked by: Brandon K

0

Expert Reply:

Yes, since your trailer fenders are currently roughly 31 inches long you can replace them with the 31 inch Replacement Single Axle Trailer Fender # HP23VR.

expert reply by: Kyle S

0

Answer 1

We offer two fenders that have dimensions you may be able to work with for your Champion boat trailer. The first fender I recommend is the Fulton Single Axle Trailer Fender, part #F008594. This is a Silver polyethylene material that measures 9.7…

view full answer...

Answer 2

I have a recommendation for you as we do not have an exact replacement step for the Karavan step fenders you have in diamond plate. You can mount the Single Axle Trailer Fender #HP23VR using the Step Brackets #CE19012 and #CE19011. These are not a…

view full answer...

Answer 3

Since we don't carry a fender that exactly matches the dimensions of your existing fender, replacing both fenders would be your best bet. We do have some steel, aluminum and plastic fenders that are pretty close in size, even though they're…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 12

Hello Femi, Thanks for reaching out! Both the Demco Autoslide #DM39SV and #DM29GV are excellent choices for your 2026 GMC Sierra 3500 with the factory prep package, and both are compatible with your Grand Design Reflection 150 Series. The biggest…

view full answer...

Replacement For 31 Inch Trailer Fenders

Product Page this Question was Asked From

Continue Researching