Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
9" Wide x 32" long x 14" tall. This sturdy steel fender has a slanted back, offering extra cargo clearance and making it great for your boat trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is Jeff at etrailer.com. Today we're going to take a look at the single axle slant back steel trailer fender for a quantity of one. Now this fender is designed to cover one tire on the side of your single axle boat trailer. It'll act as a splash guard, keeps running road debris from hitting other vehicles and it will help to protect your trailers' cargo. Now a slant back design it's typically used on boat trailers. And when I say slant back, what I'm talking about is if you look at this, I want to just show you a zoom in here so we can talk.
The very bottom right here is going to be wider than the top and the reason it slants back, it's designed to leave enough room for your boat while providing adequate coverage for your tire. Also, if you notice on the outer edge of this fender, it's a nice curved radius slip to it. Gives it a nice clean finished look.And this is a sturdy 16 gauge cold-rolled steel construction. This fender can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish. And this can be welded on or bolted on.
Now, if it is bolted on, it will require mounting brackets, which we do sell separate on our website. They're part number CE26061G-2. And again, those items are sold separately on our website. This fender is made in the USA. It is for quantity of one fender.
The application again, it's for single axle trailers with 14 inch to 15 inch diameter wheels. And as a general rule, when your trailer is loaded to its full capacity, there should be a minimum clearance of about three inches between the top of your tire and the underside of your fender.A few specs on this, the weight is about eight pounds. The dimensions, we first do the height. From the bottom the very top is right at 14 inches tall. The length from one end all the way to the other end is 32 inches long.
And then we mentioned the slant back, so it has a different measurement. The base is going to be wider. So again if we put the ruler on that, it's going to be right at about nine inches at the very bottom of the base. And at the very top in the middle here is going to be right at seven and three quarter inches.But that should do it for the review on this single axle slant back steel trailer fender for a quantity of one..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Fenders were great. Well made and fit p erfect
Came to me damaged returned this item
Excellent service
New fenders arrived quickly. Looking forward to the upgrade to my boat trailer. Thanks again.
I ordered 2 of these fenders. Received a 30” and a 32”. Called and talk to customer service and was told that they didn’t have anymore 32” in stock and would be approximately 3 weeks before other fender was available.
Fit perfectly for my application. Very strong, I step on them regularly. Smooth surface than accepted primer and paint well.
Your product was excellent. The fender I originally ordered was the wrong size, and had to be returned. Your people did a fantastic job of helping me return the first fender, and getting the correct fender to me. You run a first rate company. Thank you.
I am extremely please not only with the quality of the product but with the focus on customer service, too. My purchased was shipped and delivered much earlier than expected, with follow up emails to ensure satisfaction by the E-trailer team. Highly recommend and will buy from this company in the future!
Extremely fast shipping! Etrailer has a large selection of fenders to select from.
Good inventory..IN STOCK, online order simple, communication emails from customer service,prompt processing and shipping,arrival on time
We're an excellent replacement for my rusty boat fenders. Great price as well!
Shipping was good but it was delivered dented. No big deal as I removed the dent and it was to be covered anyway. Quality seems good as it is holding up so far.
I called in an order and didn’t have part numbers didn’t have much information other than what I needed and customer service was able to find exactly what I was talking about in a short amount of time got them ordered and I was amazed that one day I had what I ordered shipping was extremely fast thank you Ed and etrailer
Better than the original! I need another for the other side!
The fender was supposed to angle in on the backside to follow the shape of the boat, but is flat on the back side. An email to address the issue was not returned.
My experience was as smooth as it could be. Thank you etrailer.com
Great delivery time a service , unfortunately not the right product. Was already on the phone with customer service and they were very helpful. Hopefully I get the correct set next week.
As described, very happy
Great quality but had a bit of trouble getting it to fit
Nice fender made of nice heavy steel, it's built better than what came in my boat trailer. Thank y ou for carrying quality products
Parts arrived in good condition. Metal thickness is correct. Where they lose stars is the sloppy metal work on the slant back edge. It is extremely wavy (not flat) where the carpeted plywood inner wall attaches. If you flatten this out it will "shrink" the inner diameter. This will cost extra to have a body shop correct. But given the trouble I had with locating this fender, I am still satisfied even with the extra costs.
Great fender. Installed on a Four Winns boat trailer. Nearly exact match for original. Had it powder coated along with full trailer. Strong. Easy to stand on. Highly recommended.
The trailer fender worked great. The oem fender was a little bit shorter so I cut about 6 inches off of the ends and it worked fine to repair a customer's boat trailer after his axle came out from under the trailer.
Great product. Priced right. Quick ship ping.
Received order quickly. Will have to modify fenders to fit my 1997 boat Trailer. Pleased with the ordering process.
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
2/21/2026
Fender are doing great. Held up perfectly during heavy use over last summer.