3/4 inch D-Ring Adapter that Can be Used with Blue Ox Aventa Tow Bar

Question

Question:

Will these ends fit on a blue- ox Bx 7330 aventa tow bar,

asked by: Fb

0

Expert Reply:

Blue Ox has a similar adapter with the part # BX88358 which works with the Aventa tow bar and fits 3/4 inch D-rings but the part # RM-035 only fits Roadmaster tow bars so it wouldn't work for you.

expert reply by: Jameson C

0

Answer 1

Hey Dan! Demco doesn't make specific adapters but you can use the Roadmaster Adapter #RM-035 (3/4" thick D-ring bumper mounts) or #RM-035-1 (1" thick) to attach it to your bumper. You will likely need some additional bushings for proper…

view full answer...

Answer 2

Thanks for reaching out to us here at etrailer. It looks like there might be some D-rings on your bumper. Is that correct? If so, do you know the measurement of those D-rings? You should be able to attach a photo to a response to this answer.

view full answer...

Answer 3

Hey Tracy, for your 2025 Jeep Wrangler we have the Curt tow bar wiring kit part #C96JR as a fit that does not require any splicing. This installs easily by plugging inline with the vehicle taillights. Since it uses a 4-way connector and you have a…

view full answer...

Answer 4

Hey Lessa. I've got a puck light that's pretty close to your current one. It's the Warm White Glantastic item #328-K-58L34P9. This is a 4-1/4" diameter x 1" deep puck light that fits a 3-3/8" diameter x 3/4" cutout.…

view full answer...

Answer 5

Hello Wayne, Great question. I would double check that the bumper with the D-Rings is rated for flat towing, not all bumpers are. The Roadmaster D-ring adapters will work on your Demco Commander. It depends on the thickness of the D-Rings on which…

view full answer...

Answer 6

In order to use a tow bar with a set of welded-on d-rings which are commonly found on aftermarket Jeep bumpers you need a specific type of tow bar, one that mounts on the motorhome when not in use. The Roadmaster Falcon 2 Tow Bar part #RM-520 and…

view full answer...

Answer 7

Hey Terry, thanks for reaching out! Yes, the Demco Stay-IN-Play Duo #DM86VR wiring can be spliced into the Curt Custom Tail Light Wiring Kit #C96JR but you'll need to add a Diode #RM-690 to each circuit to avoid backfeeding. So this will work,…

view full answer...

Answer 8

With the brake controller set to its maximum setting, you should be getting 12 volts at the trailer connector when applying the manual lever. Since you are only getting 8.5 volts at the connector, the issue you are having is likely somewhere on the…

view full answer...

Answer 9

I will be happy to clear up what all you will need to add the equipment to tow the trailer and activate the electric brakes. First, if your 2004 Nissan Xterra does not already have a trailer hitch you will need to add one. A popular option is Curt…

view full answer...

Answer 10

Yes, per the installation instructions, your 2014 Nissan Pathfinder with the Controller Area Network, or CAN Bus system, it is recommended by the manufacturer that you use the 30-amp circuit breaker kit #331-CBK30-EB. This, along with your Redarc…

view full answer...