How to Verify The 3-Leaf Slipper Spring # e99SR Will Replace the Spring on the Trailer.
Updated 06/06/2023 | Published 06/04/2023
Question:
i was just making sure this product will fit my application e99SR3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8 Long - e99SR. is there a way i can send a picture of the old leaf spring?
asked by: John W
Expert Reply:
To verify the 3-Leaf Slipper Spring # e99SR will fit your trailer you will need to take the weight off your current leaf spring so you can compare it with the measurements. Please see the image below to know where to measure and know the lengths A, B and F could be different depending on how much the spring sags. This leaf spring is 1-3/4" wide.
A: 11"
B: 22-3/4"
C: 24-5/8"
D: 12"
E: 14-1/2"
F: 4"
If you find your measurements are different please let me know what you find so I can determine if this is the correct length.
(click to enlarge)
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 24-5/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: bumper hitch
- Search Results: rv hitch receiver
- Search Results: nylon bushing
- Shop: Suspension Enhancement
- Search Results: leaf spring bushing
- Search Results: bushing
- Search Results: trailer safety chains
- Q&A: Rear Suspension Enhancement for a 2006 Toyota Highlander
- Q&A: Dimensions of Nylon Pivot Bushing for Toledo Brake Actuator
- Shop: Nylon Bushing - 1/2" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: Buyers Products 3/8" x 42" Class 4 Trailer Safety Chain with 1 Clevis Hook - 43 Proof
- Shop: Replacement Nylon Pivot Bushing for Toledo Brake Actuator
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Q&A: Galvanized Slipper Springs for Boat Trailer
- Q&A: Recommended Axle and Leaf Springs for a Magic Tilt Boat Trailer
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Search Results: trailer leaf springs
- Q&A: Spring Compression for the etrailer 4-Leaf Slipper Spring While Under a 1,000 lb Load
- Q&A: Does Trailer Need to be Jacked Up to Measure Leaf Spring for Replacement
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Video: Complete Breakdown of the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
- Video: Complete Breakdown of the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles
- Video: In-Depth Review of the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Video: Hands-On with the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Video: What to Know About the CE Smith Rear Hanger Bracket for Trailer Slipper Springs
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
on Trailer Leaf Springs
