How to Replace the Plastic Key for Rhino Rack Locks

Question

Question:

Have misplaced plastic tool to unlock the leg to change position of saddle rack. Does rhino make a replacement or is there any other way to get it off without breaking it?

asked by: Bryan A

0

Expert Reply:

Rhino Rack does not offer that replacement key but what you can do is use the Rhino Rack Masterkey item # RRRK005-4 to replace all four cores with new cores and have an actual key. These are better locks too so a solid upgrade.

expert reply by: Jerred H

0

Answer 1

We can get you the Rhino Rack 005 key with the part number #RRRK005-2 which includes two keys and a couple spare lock cores but the Sportrack key you mentioned does not fit as it's a different brand. Rhino Rack does not offer the individual…

view full answer...

Answer 2

We do have a way for you to get a replacement key 093 for your Rhino-Rack roof rack, though Rhino-Rack does not make just the keys by themselves available, unfortunately. So the only way to get a replacement 093 key is with the lock set that includes…

view full answer...

Answer 3

We don't currently carry just the replacement keys so you would have to buy both the key and lock core. If you can find me the code for you key I can try to find the correct replacement. For example, the Rhino-Rack Masterkey Lock Barrels…

view full answer...

Answer 4

The Rhino-Rack Masterkey Lock Barrels #RRRK005-2 are available in different key codes. These show they use the key 005 so you are able to match additional accessories when you but additional components. You can get different codes such a 093…

view full answer...

Answer 5

Rhino Rack does not offer replacement lock cores but what you can do is use the Rhino Rack Masterkey part #RRRK005-4 to replace all four cores with new cores and have new keys to match.

view full answer...

Answer 6

The Rhino-Rack Masterkey Lock Barrels #RRRK005-2 have the same key 005 you have on your 2500 series roof rack. So you will be able to use these keys with your rack. While they all say master key do understand it is not like other master keys and can…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

How to Replace the Plastic Key for Rhino Rack Locks

Continue Researching