Recommended Center Cap for Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2

Question

Question:

Center caps for trailer wheels

asked by: Joseph M

0

Expert Reply:

If you're looking for a center cap for the Dexstar Steel Mini Mod Trailer Wheel part # AM20742 then we have just what you need, the Americana Trailer Wheel Center Cap part # AM90077 which is an exact match made of stainless so it won't rust and has a removeable center cap so you can grease your spindles if they have a built-in zerk.

expert reply by: Conner L

0

Answer 1

Yes, unless otherwise stated on the product page for a wheel, it will have a zero offset. So for Dexstar trailer wheel #AM20742 it does have a zero offset meaning the mounting surface of the wheel to the hub is right in the center of the hub. I have…

view full answer...

Answer 2

This will not be an issue for mounting the LED Trailer Tail Light with License Bracket #328-003-81LBM1 on your 2018 Grand Design Imagine Travel trailer. The light bracket that mounts to the trailer has tabs on the back with an outer ring to leave a…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Recommended Center Cap for Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching