Solution for Hitch Plate for 2015 International Prostar

Question

Question:

I NEED A HITCH PLATE FOR 2015 INTERNATIONAL PROSTAR I HAVE THE MESSURE INSIDE THE C CHANNEL ITS 33INCH 1/4 [-33inch 1/4-] on the out side ^ [ ]^ I34inch-I and the inside hight of the [foot channel [ -6inch 1/4 do you have some that will fit on this truck

asked by: Alberto G

0

Expert Reply:

For your 2015 International Prostar I recommend the Buyers Products Weld-On Pintle Hitch Plate # 3371809027A. The plate dimensions are 25-1/2" tall x 34-1/2" wide x 3/4" thick. It is a fabricators hitch plate so you will need to take it to a certified welder or fabricator for installation. This is the best option since there are no custom fit hitch plates for your truck.

expert reply by: Robin H

0

Answer 1

As long as the distance from outside to outside on the rear frame rails of your 1973 Chevrolet T-65 is 34 inches the Buyers Products Hitch Plate with Receiver Tube #3371809065 is the correct size and would work well. It's designed to fit the…

view full answer...

Answer 2

The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the #3371809065 below for your reference.

view full answer...

Answer 3

The highest capacity pintle hook that can fit on the Buyers Products Fabricators Hitch Plate - 3/4inch x 34-1/2inch x 22-1/2 Item #3371809027A you referenced is the part #33710042 which has the non-offset mounting bolts like you mentioned and has a…

view full answer...

Answer 4

I went out to our warehouse and measured the Buyers Products 45 Ton Pintle Hook #337PH45 for you. The mounting platform where the holes are drilled, has a thickness of 0.7 inches.

view full answer...

Answer 5

The Buyers Products Weld-On Pintle Hitch Plate #3371809043 is definitely going to be your best bet as far as a pintle mount for a 2021 Kenworth T880. It is not custom fitted for any specific vehicle, but it can be fabricated to fit virtually any…

view full answer...

Answer 6

The bolt holes from left to right on the Buyers Products Pintle Hitch Plate Mount part #337PH50 are separated by 5 inches and from the top to middle the distance is 2-3/8 inch and then from middle to bottom is 2-1/8 inch.

view full answer...

Answer 7

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

view full answer...

Answer 8

There actually won't be any bolts needed at all for the hitch plate and pintle hook you mentioned. The reason is that you will weld on the Buyers Products Fabricators Hitch Plate #3371809027A, and the mounting bolts actually come with the Pintle…

view full answer...

Answer 9

Although we do offer the mounting kit #3378530, there are no specific plates we carry capable of handling the same capacity as the #337PH30. The only option would be the Buyers Products Weld-On Pintle Hitch Plate #3371809027A. However, this would…

view full answer...

Answer 10

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Solution for Hitch Plate for 2015 International Prostar

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching