Replacement Hitch Pin for Thule Pro 934 Bike Rack

Question

Question:

Looking for a replacement hitch bolt for a Thule Pro 934 bike rack. Threaded metric M12.

asked by: Steven H

0

Expert Reply:

To replace the threaded hitch pin bolt for your Thule Pro 934 bike rack you need part # TH62RE.

We also have the replacement hardware kit # 7520990001 if you need more than just the hitch bolt, or part # THSTL2 if you want the locking hitch pin kit.

expert reply by: Jon G

0

Answer 1

I spoke with our contact at Thule and she confirmed that part #908-1240-54 is the correct replacement bolt for the Thule Hitching Post Pro Bike Rack, part #TH934XTR. If you also need a replacement washer and lock washer for the bolt, you can use…

view full answer...

Answer 2

Definitely! The Thule Hitching Post Pro #TH934XTR uses a lot of the basic Thule equipment including the following: Stay-Put Cradle - #853-7887 Anti-Sway Attachment - #852-2903-001 2" Hitch Adapter - #853-7489 Round Tube End Cap - #853-2181…

view full answer...

Answer 3

If you have the Thule T2 Classic 2 #TH9045, I confirmed with Thule that the direct replacement of the hitch pin is the #TH62RE. If you need the lock housing for the pin as well, that is the #753-3725-02. These components are the only confirmed…

view full answer...

Answer 4

When it comes to replacing the 12 x 40mm hex bolt for your Thule Roadway 4 bike rack you will need The Replacement 12 x 40 mm Hitch Bolt for Thule Hitch Bike Racks #908-1240-54. You will also need The Replacement M12 Lock Washer #956122159. I you…

view full answer...

Answer 5

If you do indeed have the Thule Parkway then the part number you mentioned, #7520990001, is correct. If you would like the locking pin use #THSTL2 instead.

view full answer...

Answer 6

I spoke with our contact at Thule and she confirmed that part #908-1240-54 is the correct replacement bolt for the Thule Hitching Post Pro Bike Rack, part #TH934XTR. If you also need a replacement washer and lock washer for the bolt, you can use…

view full answer...

Answer 7

Yes, the anti-rattle hitch pin included in the Replacement Hardware Bag #7520990001 would be a compatible fit for your Thule Hitching Post Pro (934PRO). This doesn't include a lock though so any one with a socket or wrench set could potentially…

view full answer...

Answer 8

Thank you for the picture. It looks like you have the Thule Hitching Post Pro, part #TH934XTR. We have a replacement bolt for that, but the bolt you reference, part #915087031, is not it. The replacement bolt you need comes in the Replacement…

view full answer...

Answer 9

If your Thule Vertex 4 Bike 9029 does not have the Anti-Sway Attachment #852-2903-001 you can add this along with the Strap #852-3006-001. The Anti-Sway attaches to the Cradle #852-3005-002 to help reduce the amount the bikes are able to move…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Hitch Pin for Thule Pro 934 Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching