Does the Jawz2 V-Profile Crossbar Mounting Brackets Have 4" Center on Center Measurements

Question

Question:

I need an adapter plate with holes 4 inches from center to center of the hole. Will this work.

asked by: Anthony M

0

Expert Reply:

I took a look at the Replacement Jawz2 V-Profile Crossbar Mounting Brackets for Malone Watersport Racks # MAL66TR and on Malones website, it appears that the # MAL66TR does have 4" center-of-the-hole to center-of-the-hole spacing.

The # MAL66TR mounting brackets are specifically designed to be used with Malone watersport carriers except the MPG121. They will work with crossbars up to 3.5" wide and 1.25" tall.

expert reply by: Scott S

0

Answer 1

I checked with Yakima and the largest LockNLoad Platform Tray that will work with a roof rack system with two crossbars is the 60" Long x 54" Wide Yakima LockNLoad Platform Roof Tray #Y05045. To mount this tray to your BMW you will need the…

view full answer...

Answer 2

Thanks for the awesome detail in your question! I pulled each part from our warehouse to provide you the measurements requested. The Thule Xadapt12 kit #THXADAPT12 T-bolt head size is 3/4 inches, 7/8 inch long threaded portion and .23 inch diameter.…

view full answer...

Answer 3

The Perimeter Rail Kit for Yakima LockNLoad Platform Racks #Y62AV includes all 4 rails for your platform. It has 2 side rails and 2 front/rear rails along with the hardware for installation. This will fit your 76" long x 54" wide LockNLoad…

view full answer...

Answer 4

Hey Matthew, so the Thule rack you mentioned does not fit the utili track of your 2006 Nissan Frontier but we do have the somewhat similar Yakima Outpost HD part #Y01152-5868 that is a confirmed fit and would work great.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 10

Hi Joel! The easiest way to install a brake controller on your 2026 Toyota 4Runner would be to use the Redarc Tow-Pro Elite Brake Controller w/Custom Harness part #RED56CR. It is the same Redarc Tow-Pro brake controller as the RED44FR but has the…

view full answer...

Answer 11

Hey Bryan, Thanks for the photo and specific info you gave, and if you're sagging to the point that it's affecting oncoming drivers you definitely need suspension enhancement. That much sag is actually going to affect your 4Runner as well…

view full answer...

Answer 12

Hello Shawn, The 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches - Steel - 440 lbs #e54VV is a great option for hauling your gear while keeping it protected. We do have a cover available for it as well! You will want the Cargo Cover for…

view full answer...

Does the Jawz2 V-Profile Crossbar Mounting Brackets Have 4" Center on Center Measurements

Continue Researching