How To Operate Middle Jacks Of A Lippert Ground Control 3.0 Leveling System

Updated 04/25/2023 | Published 04/24/2023

Products Featured in This Question

Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set

(123)

$3446.48

Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System

(140)

$329.90

Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Bluetooth Control - 6-Point Set

(123)

$3928.52

Question:

How can I manually lower the center stabilizers 6 point system? Manual mode only shows front and rear. It is on a 2015 Jayco pinnacle 5th wheel.

asked by: Mike

Helpful Expert Reply:

They easiest way I've found to operate the legs of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817 is with the Lippert OneControl monitor if your trailer has it installed. This monitor will allow you to select either jack and manually adjust them.

If you have the standard control panel # LC421484 then you would need to put the system into error mode by pressing the "LEFT" (Fig. H) and "RIGHT" (FIG. I) buttons simultaneously. This will then allow you to operate the middle jacks manually. The manual mode you're referring to will only allow you to operate front or rear jacks.

expert reply by: Kevin C