Troubleshooting A RR Error Code With A Lippert Ground Control 3.0 Leveling System

Updated 06/27/2023 | Published 06/26/2023

Products Featured in This Question

Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set

(126)

$3614.55

Replacement Hall Effect Motor for Lippert Components Ground Control 3.0 Leveling System

(54)

$537.26

Question:

On my Lipitor or LCI grounding system I get right rear error when trying to level my camper I’ve checked power to the motor. I have power to that motor at 13.6 V when plugged into shore power was wondering if there’s any other checks I should do before condemning the motor itself. It does ohm ok with an ohmmeter.

asked by: Thomas A

Expert Reply:

The standard checklist when troubleshooting a error with the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 is as follows:

1. Check harness connections at controller and at jack.
2. Check harness for damage.
3. Repair or replace as necessary.
4. Check fuses at controller.
5. Repair or replace as necessary

Since you already know you're getting power at the motor it's most likely the motor or that the leg could possibly have some sort of bind. You can try to manually lower and raise the leg to see if the leg is having issues too or if it really is just the motor. I've attached the instructions below to help walk you through the manual override process. If you do need to replace the motor you can with part # LC343758.

expert reply by: Kevin C