Recommended Replacement 22" Long Slipper Springs for Boat Trailer
Updated 04/19/2023 | Published 04/18/2023
Question:
Hi, I have a venture VAB-1325 boat trailer and need to replace the leaf springs. Springs need to be able to support at least 1,325 lbs. combined. Current leaf springs are worn, flattened and broke so the normal way to measure the size is unreliable. The distance from the front bolt where the front eye of the spring would bolt onto to the bolt in the rear that the slipper spring goes over is about 20.375”. Currently the worn spring is 22” from eye to end of slipper but it has been flattened some so I don’t know if I trust it. The slipper spring has a radius end to it as well. Can you help me determine the replacement spring I need? Thanks
asked by: Jordan
Expert Reply:
I do have an option for you but we don't have any slipper springs in the size you need as they are too short. The best option we can offer you is a new hanger kit with new leaf springs, the Single-Axle Trailer Hanger Kit part # APS3SE is a good option to start with and would pair well with the 2-Leaf Slipper Spring part # SP-177275.
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 1-3/4 Inch
- Single Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: boat trailer fenders
- Shop: 2-Leaf Slipper Spring for 1,000-lb Trailer Axles - 24-1/4" Long - EMCO
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Q&A: Solution for Needing 1,400 lb Trailer Leaf Spring Close to 22-1/4 inch
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles - 20-3/8" Long - Dacromet
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Video: Complete Breakdown of the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles
- Q&A: Will The 2-Leaf Slipper Spring w/ Radius End # e36SR Fit Hangers Spread 22-1/2" On Center?
- Q&A: Upgrading the Tire and Wheel on a Harbor Freight Trailer
- Q&A: Recommended Parts for Rebuild/Upgrade of Harbor Freight Trailer
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Trailer Wiring
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Search Results: trailer wiring
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
on Trailer Suspension Parts
