Does Chipped and Burned Spindle Need to Be Replaced
Updated 04/12/2023 | Published 04/11/2023 >
Question:
If your rv spindle has a small pit in it should it be replaced? I also notice some burn mark discoloration on the spindle and on the inside of the bearings.
asked by: Todd C
Expert Reply:
The chips and the burn mark on your trailer spindle is an indication that the inner bearing overheated. That is definitely enough damage that you need to seriously consider replacing the spindle otherwise that damage could then chip and damage any replacement inner bearings you install.
I can't quite make out from that photo what size spindle you have but if you can let me know the axle capacity I'd be happy to help you select a replacement from our linked selection!
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: timken 02475
- Search Results: trailer bearings races seals caps
- Video: All You Need to Know About the Rubber Wiper Seal and Bulb for RV Slide Out
- Q&A: Replacement Timken Parts for 25580/15123 Bearings and 10-36 Seal
- Shop: Timken Replacement Trailer Wheel Bearing - 25580
- Shop: Timken Bearing Kit 15123/ 25580 Bearings, 15245/25520 Races, 412920 Seal
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Replacement Bearing - 25580
- Video: A Closer Look at the Timken Replacement Trailer Wheel Bearing
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 452920/482920
- Q&A: Is The Timken TMK98ZR The Same As The National 452920/482920 Seal?
- Q&A: What is Difference Between TruRyde and Timken Grease Seals
- Shop: Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 60' Long x 3-3/16" Wide
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Grease Seals 10-36 (pair)
- Q&A: Is It Normal For Trailer Tires To Increase In PSI While Towing
- Q&A: Do Timken Bearings Come In Boxes With Anti-Counterfeit QR Codes On Them
- Q&A: Is It Worth Upgrading to MORryde AllTrek 4000 From CRE3000 on Jayco 5th Wheel Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Search Results: dexter hub assembly
- Search Results: castle nut retainer
- Search Results: 6000 lbs axle trailer bearings races seals caps
- Search Results: ce13515
- Search Results: axle nut retainer
- Video: Comprehensive Review: Curt Replacement OEM USCAR Trailer Connector
- Video: An In-Depth Look at the Trailer Idler Hub Assembly for 3,500-lb Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub


