Is There A Ramp or Adapter That Works With the Thule T2 Pro?

Question

Question:

I have a Thule T2 pro bike rack and want to get a Thule easy fold XT ramp but dont have the slotted ends to accept the ramp.. is there an adaptor for the T2 Pro?

asked by: Dave B

0

Expert Reply:

Unfortunately there is not a compatible ramp or adapter that will work with your Thule T2 Pro XTR Bike Rack for 2 Bikes - 2" Hitches # TH83JV.

If you're needing a ramp your best bet apart from fabricating your own is to use the Thule EasyFold XT Bike Rack for 2 Electric Bikes # TH903202 which includes a folding ramp for loading your bikes.

expert reply by: Bryce D

0

Answer 1

The best bike rack we have for your 2018 Porsche Macan with cargo access in mind is hands down the RockyMounts BackStage 2 Bike Platform Rack part #RKY10002. The reason for this is because it has a swinging mechanism that will allow you to swing the…

view full answer...

Answer 2

We have some bike racks that will come with and or have the option of adding a ramp, but the Thule T2 Pro XTR Bike rack #TH83JV is not one of them. The ramp #ANVBRB can be used with the Kuat NV 2.0 #BA22B. I used this last week and the ramp works…

view full answer...

Answer 3

I have an answer for you. Unfortunately, we currently don't carry any bike ramps that are designed for your Thule T2 Pro XTR #TH83JV. The only thing that would come close would be to purchase something like the Race Ramps Trailer Loading Assist…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 8

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 9

Hey Ahmed. I've got a few options for extenders that will work with your Ram truck depending on what kind of hitch you have. If your 2014 Ram 2500 has a 2-1/2" hitch receiver, I recommend the Curt Hitch Extension and Reducer for 2-1/2"…

view full answer...

Answer 10

Hi Dennis! The Hellwig Load Pro 35 Heavy Duty Helper Springs with Custom Mounting Kit - Above Axle #HE93XR can potentially raise an unloaded truck a little, but it's going to be very minimal and will really only happen if your suspension is…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15809 is a great option for your 2011 Ram 2500 as long as you are okay with a 24 inch hitch extension like #C45048. This will give you a gross trailer weight of…

view full answer...

Is There A Ramp or Adapter That Works With the Thule T2 Pro?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching