Will Air Bags Interfere With The Installation Of A Rear Anti-Sway Bar On A 2006 Dodge Ram 2500

Question

Question:

Can the rm1129-124 fit my 2006 Dodge Ram 2500 diesel with Firestone air bags?

asked by: Pete V

0

Expert Reply:

The Roadmaster Rear Anti-Sway Bar # RM-1129-124 is going to install away from the air bags so you shouldn't have any issues have both installed on your 2006 Dodge Ram 2500. I actually found a customer submitted photo showing the two side-by-side on a 2004 Ram 3500 to give you a better idea of how they fit together.

expert reply by: Kevin C

0

Sway Bar - Air Bags Customer Photo
(click to enlarge)

Answer 1

Hey Wes, unfortunately it looks like the Hellwig Big Wig Rear Anti-Sway Bar #HE32RR is not intended to be used with Diesel engines so it's not going to work with your Dodge 2500. We do have a couple other options that don't say anything about…

view full answer...

Answer 2

Hey Rob, The Hellwig Big Wig Rear Anti-Sway Bar #HE92RR installs with the end links behind the axle with a mounting bracket right by the spare tire. The Roadmaster Rear Anti-Sway Bar #RM-1129-130 installs with the end links in front of the axle. I…

view full answer...

Answer 3

Hey Ryan, The Hellwig Big Wig Rear Anti-Sway Bar #HE32RR (7265) is for a 2008 Dodge Ram Pickup that has a diesel engine, while the Anti-Sway Bar #HE92RR (7266) is for a 2008 Dodge Ram Pickup that has a 4" axle tube. Just make sure you pick up…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey, Daniel. Thanks for your question. We do have a weight distribution hitch that would work for your trailer and still use chains. That hitch is the Blue Ox SwayPro #BXW0350. The tongue weight rating needed for this system to work is between…

view full answer...

Answer 10

Hey Mark, yes we do have a version of the Andersen part #AN88VR with a 2-5/16 inch ball instead with the part #AN53VR. What does your trailer weigh?

view full answer...

Answer 11

Hey Don, Curt does have a Class V hitch for your Ram but it sits super low so it's not going to be what you want. Draw-Tite offers Trailer Hitch Receiver #DT45509. It has a 2-1/2" receiver tube opening, 18,000lb gross towing weight/2,000lb…

view full answer...

Answer 12

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Will Air Bags Interfere With The Installation Of A Rear Anti-Sway Bar On A 2006 Dodge Ram 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching