Lift Kit For Dexter 3,500LB Torflex Axle On a 2020 Forest River Rockwood A122S Hard Sided A-Frame

Question

Question:

I have a 2020 Forest River a122S. I have the lift kit from etrailer and just want to confirm these are a match for my camper. Thank you.

asked by: Jerry S

0

Expert Reply:

Yes, I do see the Torflex Lift Kit # K71-707-01 is the correct part for your 2020 Forest River Rockwood A122S. This camper is supposed to have a 3,500lb Dexter Torflex axle which the lift kit above fits.

expert reply by: Bud M

0

Answer 1

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 2

Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…

view full answer...

Answer 3

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 4

I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.

view full answer...

Answer 5

We offer four different axle lift kits for the Dexter Torflex axles. The difference between these kits is based on the weight capacity of the axle or tandem axles. There will be a tag on the axle shaft that will have the information needed to…

view full answer...

Answer 6

Hi Christina, I wasn't able to figure out what axle you have based on the serial number, but since the label shows the axle was made in 2020, I searched for a 2020 Escape 17B and it should be a Dexter Torflex #10 Torsion axle. The Torflex axle is…

view full answer...

Answer 7

Hey Dennis! Since you have the #10F axle with a 4,000 lb capacity the Torflex Lift Kit - Single Axle - 2-7/8" Lift #K71-707-01 is the correct kit. The F designation is for the higher 4k capacity since the standard #10 tops out at 3,500 lbs. This…

view full answer...

Answer 8

The Jayco Jay Feather Lite x17z uses a Dexter Torflex Axle so we do have lift kits available. The correct one is the Torflex Lift Kit part #K71-707-01 for model #10 from 2,300 lbs to 4,000 lbs.

view full answer...

Answer 9

Since you said you have Torsion axles I need to know what brand of axles they are and what capacity to determine what lift kit you'd need.

view full answer...

Answer 10

For your single axle Lance 1475 travel trailer you will use either Torsion Lift Kit #K71-723-01 or kit #K71-707-01 depending on which Torflex axle you have. You can check the identification sticker on the axle beam to find the axle number. If you…

view full answer...

Answer 11

If you have a #10 Torflex axle on your trailer the correct lift is the part #K71-707-01 which will give you 2-5/8 inches of additional lift. Does your trailer frame have the vertical brackets for the side mount like what you see in the picture? You…

view full answer...

Lift Kit For Dexter 3,500LB Torflex Axle On a 2020 Forest River Rockwood A122S Hard Sided A-Frame

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching