Tool Used to Enlarge Hole on etrailer Trailer Hitch Receiver for 2014 - 2018 Subaru Forester

Question

Question:

There is a drill bit used to grind the hole and make bigger in the video so the. What type of bit is that?

asked by: Jake

0

Expert Reply:

If the holes are slightly off center when installing the etrailer Trailer Hitch Receiver part # e98839 which is a fit for a 2014 - 2018 Subaru Forester, you can enlarge them using a burr bit which you can obtain locally. Please note, these should only be used to correct minor issues. If the holes are too far off you'd want to either bend the hitch back into place or replace it.

expert reply by: Conner L

0

Answer 1

Hey Michael. If by clips you mean the zip strip on the rubber straps it's best to cinch them down as much as possible when you're attaching your bikes to the Benton ShiftShow Bike Rack item #B94FR. You'll want to make sure the latch is…

view full answer...

Answer 2

I can confirm you are not imagining things, but you do have the companies reversed. There is a stabilization strap recommended with all Curt Hitches and required for some. For instance, the Curt Trailer Hitch Receiver Class III - 2", #C13144,…

view full answer...

Answer 3

For your 2015 Subaru Forester I would recommend going with a hidden hitch like the EcoHitch part #306-X7216 as only the hitch opening hangs below the rear bumper and the lower hitch opening is removable which means when not in use it's totally…

view full answer...

Answer 4

You could do that if you wish, you'll just want to make sure that the heat shield is NOT sandwiched between the hitch and the chassis of the vehicle at any point. We frequently hear from folks with concerns about the vehicle being harmed because…

view full answer...

Answer 5

Hi Michelle! We actually do post the install times for hitches. For the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98839 going onto your 2018 Subaru Forester, we have it listed as taking 40 minutes (see…

view full answer...

Answer 6

Actually, removing and leaving off the heat shields won't present a problem. Instead of the thin metal of the heat shields, there's now a hitch installed which will provide much better heat shielding than the factory heat shields did. Plus,…

view full answer...

Answer 7

That's a good question, and what you will need is a 1-1/8" (1.125") step drill bit as that's the dimension you'll need to enlarge the center holes in the frame of your 2014 Subaru Forester to install the etrailer hitch that…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The Class III Curt Trailer Hitch #C13144 does require the use of a stabilizer strap like part #18050 to comply with the warranty. Instead of going with the Curt option I recommend using the etrailer.com Trailer Hitch #e98839 or the Draw-Tite #75876…

view full answer...

Answer 10

For max tongue weight you will need to stay under the least rated component so even though the etrailer Trailer Hitch Receiver #e98839 has a 525 lb tongue weight rating, I looked in the online owner's manual for your 2017 Subaru Forester XT and…

view full answer...

Answer 11

Yes, the Curt hitch would be more difficult to install. On our website we have a installation difficulty rating, from 1 to 10, on hitch receivers. The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2", part…

view full answer...

Answer 12

It's hard for me to offer suggestions on the etrailer Trailer Hitch Receiver part #e98838 which is a fit for a 2017 Subaru Crosstrek as I don't physically have the hitch and vehicle in front of me but the instructions state you'll need…

view full answer...

Tool Used to Enlarge Hole on etrailer Trailer Hitch Receiver for 2014 - 2018 Subaru Forester

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching