Weight of Deezee Bed Mat For 2022 Ram 1500 With 5-1/2 Foot Bed

Question

Question:

How much does the mat weigh?

asked by: Jose

0

Expert Reply:

The weight is 31 lbs for the DeeZee Custom-Fit Truck Bed Mat # DZ87015 which fits your 2022 Ram 1500 with a 5-1/2 foot bed.

expert reply by: Kyle S

0

Answer 1

Hey David, Thanks for your question! Unfortunately, I'm not aware of a way to link an aftermarket wireless trailer camera to your truck's factory camera system. This is a common question we receive about aftermarket systems, such as the…

view full answer...

Answer 2

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 3

The best option I have to install a 12 volt power outlet in a truck bed would be to use the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly part #HM55115 and wire this directly to the battery. This would need to be wired directly to…

view full answer...

Answer 4

Hey Casey the High Pointe Microwave Model EM923MI2-S has been replaced so we do not have it in stock. The newer model is the High Pointe Built-In Flat Bed RV Microwave - 900 Watts - 1 Cu Ft - Stainless Steel item #HP84ZR. It measures 22-5/16"…

view full answer...

Answer 5

For your 2022 Lance 850 truck camper that measures 18 feet in length the best option for a cover is the Camco Ultraguard part #CAM45770 which provides the best protection in hot and dusty climates and also is easier to fit and install.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

If the 7 Way Trailer Plug was installed upside-down, it definitely could have shorted something out. Using something like the circuit tester #PTW2993, you will first need to check all the ports on your 7 Way vehicle side plug. The 2 o'clock…

view full answer...

Answer 8

Thanks for writing in, Marco. The plug that Lance uses on their campers is a proprietary design, and unfortunately, there’s currently no aftermarket adapter available, at least not one that we carry. According to the Lance owner’s manual, the plug…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Weight of Deezee Bed Mat For 2022 Ram 1500 With 5-1/2 Foot Bed

Featured Help Information

Miscellaneous Media

Continue Researching