Will Reed Switch DM6272 Fit On Actuating Cylinder DM6215?

Question

Question:

Would part SM6272 Reed switch work when attached to DM6215 actuating cylinder?

asked by: Mark B

0

Expert Reply:

Sure will!

The Reed Switch # SM6272 will attach to the Cylinder # DM6215 you have installed on your 2021 Chevy Colorado. It just clamps on to the cylinder to tell you when the brake pedal is being depressed.

expert reply by: Samuel C

0

Answer 1

First start by checking to ensure your brake pedal is properly returning when the brakes are not applied. You may need to adjust the Cylinder #DM6210 if they it has moved and is not allowing the brake pedal to fully return to its released position.…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

I sure can Galen, and thanks for the information. Since your Tiffin motorhome has the air line connection you'll need the Demco Air Force One Flat Tow Brake System for 2020 and Newer Tiffin Chassis RVs w/Factory Air Brakes item #DM55MV. This…

view full answer...

Answer 7

Hello Tom, thanks for reaching out. We do have the Demco Air Force One Supplemental Braking System for Tiffin Chassis Motorhomes part #DM55MV. This kit includes the parts needed to install the Air Force One on your Jeep as your Tiffin chassis has the…

view full answer...

Answer 8

Hey Jim; the Curt RVibrake Shadow 2 #RVI94FR is not compatible with your 2026 Maverick. Initially it was listed as a fit but Curt/Lippert came out with an exclusion list that includes the Maverick Hybrid. Right now it is listed as 2022-2025 but it…

view full answer...

Answer 9

Hey Kevin, welcome back! You are correct, since you have ParkSense on your 2026 Rubicon the #RM-152 is not the correct wiring kit. What you need instead is the Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights #RM47ZR. This will get…

view full answer...

Will Reed Switch DM6272 Fit On Actuating Cylinder DM6215?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching