What is the Recommended Torque Spec for a 9/16 Shackle Bolt? What
Updated 03/06/2023 | Published 03/03/2023 >
Question:
9/16-Inch Step Shackle Bolt w/7/16 threads. What is the recommended Torque?
asked by: DAVID N
0
Expert Reply:
A 9/16" shackle bolt like the Step Wet Bolt for 1-3/4" Double Eye Springs # 34007-187-00 actually does not have a recommended torque because tightening the shackle bolts too much will crush the shackle straps up against the leaf springs, and the entire suspension system will bind.
Instead, the best thing to do when tightening down shackle bolts is to use lock nuts and tighten them until they are snug and then back it off 1/4 turn.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Step Wet Bolt for 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Suspension Bolts
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch Diameter
- 3-5/8 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: equalizer bar
- Search Results: hangers trailer leaf spring suspension
- Shop: Equalizer for 1-3/4" Wide Double-Eye Springs - 6-3/4" Long - 9/16" Center Hole
- Search Results: 272
- Search Results: bronze bushing
- Search Results: shackle kit
- Q&A: Are Bushings Required with the Tandem-Axle Trailer Equalizer Kit # AP233
- Shop: MORryde RV Cargo Slide Tray - 90" x 29" - 2 Way Slide - 60 Percent Extension - 800 lbs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Straight Equalizer for 1-3/4" Wide Double-Eye Springs - 8" Long - 3/4" Center Hole
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Shop: Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole
- Search Results: dexter ez flex kit
- Search Results: convection microwave rv microwaves
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer
- Q&A: Lip Clearance For MORryde Cargo Tray MR46FR
- Q&A: What MorRyde Slide Will Work with My 28" Door Opening?
- Video: A Closer Look at the Brake Mount Locking Nut for 10K, 12K and 15K Brakes
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Video: The Low-Down on the Dexter Shackle Bolt for Double Eye Springs
- Q&A: How To Choose Correct MORryde Shackle Upgrade Kit
- Q&A: Recommended Shackles and Suspension Upgrade for a Triple Axle Toy Hauler
- Q&A: Wet Suspension Bolt vs a Regular Suspension Bolt
- Video: Review of Lippert Replacement CAN Bus Data Cable For Ground Control Or OneControl - LC45ED
- Shop: Trailer Wiring
- Video: Fulton Single Axle Trailer Fender with Top and Side Steps Feature Review
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Video: A Closer Look at the Rubber Bushing with Steel Sleeve
- Video: Comprehensive Review: Replacement Trailer Brake Magnet for Dexter Electric Brake Assemblies


