Do You Have The Yakima MightMounts Bolt Upgrade Kit #8860007?

Question

Question:

I need yakima kit # 8860007 to convert round bar connectors to oval. Do you have them or a replacement? Thank you

asked by: Anne

0

Expert Reply:

It looks like we sold our last Yakima Bolt Upgrade Kit 8860007 in August of 2015 and there is not a replacement from Yakima. It does appear the kit includes four 1-3/4" hex key bolts and a hex key. You will likely be able to find these bolts locally from a local hardware store. Unfortunately they do not give a measurement on the bolt diameter or thread pitch so be sure to take the bolts you are replacing with you to match the diameter and thread pitch with the new bolts.

expert reply by: Bud M

0

Answer 1

I attached a picture that has shows the installation instructions for the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031. This will show you how to convert your Hullraiser to work on Aero bars.

view full answer...

Answer 2

The 8004039 you mentioned is the Yakima HullRaiser kayak carrier, and we do have what you need to connect the carrier to your square crossbars (1-1/4 inch by 3/4 inch crossbars are technically rectangular but are called square for whatever reason).…

view full answer...

Answer 3

You have the Yakima Control Towers with round crossbars. In one of the pictures you can make out the Yakima logo on the base of the tower. The tightening tool for this is a 5 millimeter hex wrench, part #8880143.

view full answer...

Answer 4

I reached out to a representative of Yakima who told me that for the 1-1/4 inch diameter round crossbars of a SeaSucker roof rack like the #298-SX6000B, the Universal MightyMounts for Yakima Roof Mounted Accessories #Y03590 will fit around them. They…

view full answer...

Answer 5

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 would replace the Yakima SnapAround Mounting Brackets part #Y8810135 so that you can use your Yakima bike rack with the Rhino-Rack Vortex Aero Crossbars like part…

view full answer...

Answer 6

Hey Trisha, Yakima only offers one set of replacement hardware for the Skyboxes like you have which would be the part #Y62XR. So this would be what you'd need to use as a replacement. Is it possible you weren't getting the hardware tight…

view full answer...

Answer 7

Hey Michael, thanks for the measurements! The Yakima Mighty Mount 23H Accessory Adapters item #Y03523 will indeed work with the 2-1/4" wide x 3/4" tall crossbars on your 2024 Nissan Pathfinder. This set of four adapters are designed to fit…

view full answer...

Answer 8

Hey Mark. The bolt and wing nut that install in the horizontal holes of the Universal MightyMounts for Yakima Roof Mounted Accessories item #Y03590 are specific to the carrier or box you're attaching to them. We have a few different options with…

view full answer...

Answer 9

The Universal MightyMounts #Y03590 will work with your Yakima LockJaw bike rack. The MightyMounts are designed to fit crossbars up to 4 inches wide and up to 1-1/2 inches tall. Bars that are either more than 4 inches wide or more than 1-1/2 inches…

view full answer...

Answer 10

If you have a variety of older Yakima products that you want to mount to crossbars that are 2-1/2" wide x 3/4" tall then the Universal MightyMounts #Y03590 would be your best bet. These adapters fit a wide variety of Yakima products but…

view full answer...

Do You Have The Yakima MightMounts Bolt Upgrade Kit #8860007?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching