Spring Latch Recommendation Close to 1/4" Diameter and 1-1/2" Travel
Updated 02/22/2023 | Published 02/21/2023
Products Featured in This Question
Question:
I am working on a product for a client and was wondering if you have any cut sheets on the different sizes of Locking trailer pins that you offer? I am looking for an approximate 1/4 dia. pin with around a 1 - 1/2 pull. I take it that these pins can also be welded in place?
asked by: Doyle H
Expert Reply:
The closest option we have to what you're looking for is found as part # F719-172Z105 for the right hand and part # F719-182Z104 for the left hand. These spring latches use a pin with a 3/8" diameter and a 1-1/4" pin extension which is fairly close to what you're looking for.
I'm attaching some review videos and a list of our spring latches for you to filter through. Unfortunately we don't have a spec sheet of all of our options so your best bet is to look at the selection I linked if the latches I mentioned above don't work out for you.
These are designed to be bolted into place but if you have an experienced welder install them that's acceptable as well.
Product Page this Question was Asked From
Spring Latch w/ Holdback for Trailer Tailgate - 2" x 1-1/8" - Zinc Plated - Right Hand
- Trailer Door Latch
- Right Hand
- Spring Latch
- Non-Locking
- Bolt-On
- Zinc-Plated Steel
- Paneloc
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer tires and wheels
- Video: Review of Trailer Valet Straight Tongue Trailer Coupler - Channel Tongue Trailer Coupler - TV47ZR
- Video: Assembling the Stirling Trailers Open Frame Utility Trailer
- Search Results: trailer jack
- Search Results: folding trailer tongue
- Shop: Stirling Trailers Open Frame Utility Trailer w/ Stake Pockets - 6' x 4' Bed - 1,000 lbs
- Shop: CargoSmart Eye Bolt Tie-Down Anchors - Bolt On - 3/8" x 1-5/8" - 466 lbs - Qty 2
- Shop: Spring Latch w/ Extended Handle and Holdback - 2" x 1-1/8" - Zinc Plated - Left Hand
- Shop: Trailer Valet Channel Tongue Trailer Coupler - Trigger Latch - 2" Ball - Bolt On - 3,500 lbs
- Shop: ProGrip Truck Bed Eye Bolt Anchor - 1/2" x 2" - Zinc Plated - 866 lbs WLL - Qty 2
- Shop: Spring Latch w/ Holdback for Trailer Tailgate - 2" x 1-1/8" - Zinc Plated - Right Hand
- Q&A: Trailer Hitch Recommendation for 2006 Honda Ridgeline that is Rated for Weight Distribution
- Video: Feature Breakdown: Channel Tongue Trailer Coupler
- Video: Review of the Curt QuickPin No-Latch Trailer Coupler for 2" Ball
- Video: Let’s Check Out the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel
- Video: Checking Out the Curt Fusion Ball Mount for 2" Hitches
- Video: Spring Latch w/ Extended Handle and Holdback Review
- Shop: Curt QuickPin No-Latch Trailer Coupler for 2" Ball - 2" Channel - 3,500 lbs
- Q&A: Trailer Jack to Avoid Tailgate Clearance Issues
- Q&A: A-Frame Trailer Jack that Can Attach to Inside of Trailer Frame
- Q&A: Trailer Jack Compatibility with 14 Inch Tongue Space
- Q&A: Looking For Coupler Latch Replacement For Older Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
on Trailer Door Latch
