Recommended Wheel Chock Stabilizers for a Coachman Freedom Express 238BHS

Question

Question:

I bought a coachman freedom express 238bhs and am having trouble finding wheel chocks that fit it Any suggestions

asked by: Dustin

0

Expert Reply:

You will just need to measure in between your wheels on your Coachmen Freedom Express 238BHS to verify what you need exactly, however we do have the Stromberg Carlson Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs # SC47MR.

This wheel chock stabilizer will fit a wide range of vehicles with a wheel spacing of 2" to 17", and is made from durable steel with a rust resistant coating.

If you measure the distance between your wheels and are still unable to find what you're looking for, let me know and I'd be happy to help you further.

expert reply by: Bryce D

0

Answer 1

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 2

The max amperage draw of the MaxxAir MaxxFan Mini RV roof vent part #MA00-04401M that you referenced is 5 amps.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

For your Grand Design Momentum 32G RV, I recommend the Stromberg Carlson Chock Wheel Stabilizers item #SC47MR. These wheel chock stabilizers will fit a wheel spacing of as little as 2". They are made from durable steel with a rust resistant…

view full answer...

Answer 5

The Ultra-Fab Ultra Scissor Jacks #UF48-979002 do have the highest capacity of the scissor style stabilizer jacks we carry at 6,500lbs per jack. This capacity is support capacity and does not have any lift rating. I would recommend using the…

view full answer...

Answer 6

X-Chocks that fit a tire distance of 17" will actually go longer than 17" to ensure a tight fit against the wheels. For example I went out to the warehouse and measured the Super Grip Chock XL Wheel Stabilizers for Tandem-Axle Trailers and…

view full answer...

Answer 7

Hey Jeff, The WFCO WF-8955PEC isn't lithium compatible so that's why your battery isn't fully charging. You can replace the converter section with the Progressive Dynamics #PD4655V and then move the black jumper over to the 'LI'…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Recommended Wheel Chock Stabilizers for a Coachman Freedom Express 238BHS

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching