How to Confirm the Lippert Center Point # LC1565401 Will Fit On a 2005 Keystone Raptor 3612DS?

Question

Question:

will this fit on a 05 keystone raptor 3612ds triple axle 5th wheel camper?

asked by: Marc C

0

Expert Reply:

To verify you will be able to use the Lippert Center Point # LC1565401 on your 2005 Keystone Raptor 3612DS you will need to verify your center hangers are at least 2.5” from the equalizer hole to the top of the hanger and the hanger is 3” wide or wider.

expert reply by: Bud M

0

Answer 1

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 2

The E-Z Flex Heavy Duty Rubber Suspension System #K71-652-00 is designed for a tandem axle trailer. For a triple axle trailer you will need either #K71-657-00 with 7-3/4 inch long equalizers or #K71-656-00 with 5-5/8 inch equalizers. You would not…

view full answer...

Answer 3

For your 2006 Keystone Raptor 3612 I recommend the Karrier ST225/75R15 Radial Trailer Tire - Load Range E Item #AM10303. This radial trailer tire with automotive-grade tread has a 10-ply rating.

view full answer...

Answer 4

For this we will need to confirm the pin box that is currently being used on your 2006 Keystone Raptor 3612. I believe it will be the Lippert 1621 #LC1191191 but you will either need to confirm this with either the sticker/plate on the pin box itself…

view full answer...

Answer 5

Trailer manufacturers typically don't list the specific leaf spring specs in their product information but I did call Keystone to see if they could provide the necessary details about your 2005 Raptor D3612 fifth wheel, such as axle capacity,…

view full answer...

Answer 6

If your trailer does have 6,000 pound axle it's likely you'll need the #K71-656-00 E-Z Flex Suspension System. The equalizers are 5-5/8 inches long between the bolt holes center on center. The other kit we carry is #K71-657-00 which is…

view full answer...

Answer 7

It appears that your 2006 Keystone Raptor 3612 5th Wheel Toy Hauler has an axle spacing of 33" and uses the 5-3/4" wide short equalizer. I do recommend confirming this as if the suspension has been modified in the last 16 years by a…

view full answer...

Answer 8

Thanks for the pictures and info on the EZ Flex equalizers of your 2014 Heartland Cyclone 4100. Based on that the correct replacement kit is the part #K71-656-00 that you referenced as this is the exact replacement.

view full answer...

Answer 9

Sorry to hear about your troubles. Yes, the Equa-Flex Cushioned Equalizers - Double Eye Springs - Triple Axle - 5K to 8K item #LC279689 referenced in your picture is the best option for your Keystone Raptor 3812TS. If you are getting a complete…

view full answer...

Answer 10

The equalizers on your triple axle setup will not be identical and there is nothing to worry about with your hanger spacing. However, since they appear to be worn it may be a good idea to go ahead and upgrade them. It looks like the Dexter E-Z Flex…

view full answer...

Answer 11

Yes, the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY43FR is the correct replacement for your 2006 Keystone Raptor. Your Raptor currently has the Lippert 1116 #LC1270271 pin box installed as verified by your sticker and…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How to Confirm the Lippert Center Point # LC1565401 Will Fit On a 2005 Keystone Raptor 3612DS?

Product Page this Question was Asked From

Continue Researching