Center Perch Measurements for Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2K
Updated 02/01/2023 | Published 01/31/2023
Products Featured in This Question
Question:
Hi. I have a question regarding item# e62YR 2000lb 4 on 4 pattern axle. Can you tell me what the center to center of the perch measurement is? Thanks..
asked by: Jeff
0
Expert Reply:
The Trailer Axle with Idler Hubs part # e62YR has a spring center measurement of 58" which is measured from the center of one spring perch to the center of the other. If this does not match what you need, you can remove them via cutting and weld new ones on where you need them using the Spring Seat part # TRSS175.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Replacement Axle for a 1990 EZ Loader Boat Trailer
- Q&A: Looking for a 72" Long 58" Spring Center 4 Lug Axle
- Q&A: How to Flip a 1-3/4" Diameter Axle So the Springs are Above the Axle
- Q&A: What is the Difference Between 4.80/4.00-8 and 5.70-8 Trailer Tires for a Boat Trailer
- Q&A: Trailer Tire Recommendation for Tire Size ST235/85R16
- Q&A: Moving Trailer Axle from Below Leaf Springs to Above the Leaf Springs
- Q&A: What Fenders will Work on My Nitro Boat Trailer with 14" Wheels that are 66" Long?
- Article: Slipper Spring Trailer Suspension System Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Boat Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review