How to Flip a 1-3/4" Diameter Axle So the Springs are Above the Axle

Updated 09/12/2025 | Published 08/27/2025

Products Featured in This Question

Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs

(429)

$220.31

U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts

(2093)

$41.58

Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1

(647)

$16.11

Question:

Can this be installed with the spring seats upward under my leaf springs to be overslung?

asked by: Darin

Expert Reply:

Yes, it can Darin but you'll need some extra parts. The Trailer Axle with Idler Hubs item # e62YR has a bend in it, like all axles, and if you just flip the axle over this will be pointed down causing alignment issues with your tires. You run the risk of wearing your tires out quicker just inverting the axle.

What you'll need to do is install two of the Spring Seats item # TRSS175 on the opposite side of the axle at the desired location. This will give you a mounting point to use the U-Bolt Kit item # APUBR-10 to attach the axle to your leaf springs. These u-bolts are 4-1/4" long, which is the longest we have for a 1-3/4" diameter axle.

What kind of trailer do you have?

expert reply by: Jerred H

Jerred H.

9/12/2025

Hey Darin, did you manage to install the spring seats and U-bolt kit on your trailer axle? I'm curious to know how it worked out for you, as it could help others looking to do a similar installation.