AirLift LoadLifter 7500 XL Fitment on a 2023 Ford F-350 Super Duty Dually

Question

Question:

I have the 7500xl kit installed on my 2016 and I want to do the same on a 2023 F350 dually. Neither etrailer nor the AirLift site list this as a compatible kit for the 2023 model year. Is the 2023 that much different?

asked by: Jim

0

Expert Reply:

Thanks for reaching out!

For your application I recommend using the Air Lift LoadLifter 7500 XL Air Helper Springs # AL86KV. So far (January 2023) AirLift hasn't confirmed the fit which is why we don't have it listed.

With that being said, I checked with Firestone and their Ride-Rite air bag kit fits so, logically, the AirLift kit will fit as well and it's just a matter of time before they are able to list it as a fit.

I also recommend adding an air compressor system so you're able to monitor and adjust your air bags on the fly. For your application we have the kit # AL25856 which uses an analog display or the upgraded wireless kit # AL74000EZ, both of which are dual-path systems so the air bags can be adjusted individually.

Attached are some review videos for you to check out!

expert reply by: Jon G

0

Answer 1

The issue you are having with the truck rocking back and forth due to the heavy load in the rear is referred to as porpoising and a common problem when towing or hauling. I have a few different options to help with this. If you are looking for a…

view full answer...

Answer 2

According to Curt's instructions, the torque specs for the leg bolts on the Curt A25 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package #C16066 is 100-ft.lbs. I've also included an install video on a 2018 Chevrolet Silverado 3500 for…

view full answer...

Answer 3

Thank you for your purchase of the Curt A16 5th Wheel Trailer Hitch #C16120 from etrailer, and the two bolts on the side of the head unit #C16520 should not be coming loose. According to Curt, you should make sure those two bolts are torqued to 175…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

AirLift LoadLifter 7500 XL Fitment on a 2023 Ford F-350 Super Duty Dually

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching