Depth of Easy Grease Trailer Idler Hub Assembly for 2K Axles
Updated 01/16/2023 | Published 01/14/2023
Question:
Im changing my hubs over from 4 lug to 5 lug the bearing sizes are the same from this product, everything else matches for the change over, literally all Im changing is the hubs and rims, but Im curious on the dimensions of the hub, my hub from seal to outer lip is just under 4.5 inches is this hub the same or should I keep looking for a hub?
asked by: Isaiah
Helpful Expert Reply:
The Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-LFEZ-1K is going to measure about 4-1/4" from the back to the front of the hub bore (see attached photo). This is a standard depth for this size hub so I'd be surprised if our hub doesn't fit your application.
Attached is an installation video of this hub for you to check out!
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacing Hubs On a 4' X 6' Carry On Trailer From 4 on 4" Lugs to 5 on 4-1/2" Lug Pattern 15" Wheels
- Q&A: Trailer Idler Hub Assembly For a 1" Diameter Spindle That is 4-1/4" Long
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Trailer Tire Sizing
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Q&A: Replacement Bearing Solution for DICO Hub 45263
- Q&A: Hubs for 1" Straight Spindle With 5 on 4-1/2 Bolt Pattern Using 13" Wheels.
- Article: Trailer Lighting Requirements
- Q&A: How to Establish Ground Connection When Re-Wiring Aluminum Trailer
- Article: How to Measure a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Determine Tire/Wheel Diameter
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Trailer Maintenance Schedule