SumoSprings Kit for Front and Rear of 2014 Itasca Sunstar 35F

Question

Question:

can you please tell me the part/product number for Sumosprings, front and rear for a 2014 Itasca Sunstar 35F?

asked by: Tim C

0

Expert Reply:

The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part # SSR-180-54-1 for the rear and part # SSF-170-40-2 for the front.

expert reply by: Jameson C

0

Answer 1

Hey Gary, welcome back! The Safe-T-Plus #ST88MR is spring-based and reactive, so it corrects steering after you start to drift. It’s simple, solid, and proven. The steering will be firmer with this system installed, so if that is what you prefer I…

view full answer...

Answer 2

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 3

Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it,…

view full answer...

Answer 4

Hey Steve! You need to leave the breakaway pin installed in the Curt RVibrake Shadow 2 #RVI94FR. The breakaway operates independently for safety, so even if you're disconnected from an RV it will activate the vehicle brakes. The only way around…

view full answer...

Answer 5

Hey Dave! For a replacement 60A converter that is lithium compatible to replace your 9260C I recommend the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR. Progressive Dynamics makes great products, and this includes all the same safety…

view full answer...

Answer 6

While both the Timbren Suspension Enhancement System #TFFF53B & #TFRF53A and the SumoSprings Rebel Custom Helper Springs #SSF-170-40-2 & #SSR-180-54-1 are both great solutions for your 2019 Jayco Precept 31UL, there are some differences to…

view full answer...

Answer 7

Hi Toby, At this time, Coleman Mach has not announced a heat pump version of the Mach Everest RV Air Conditioner #CM63MR. The current Mach Everest is marketed as a cooling-only, variable-speed air conditioner, and I have not seen any official…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

SumoSprings Kit for Front and Rear of 2014 Itasca Sunstar 35F

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching