Thule AirScreen XT Fairing Recommendation for a 2023 Volvo XC90 Recharge

Question

Question:

Which Thule AirScreen XT fairing should I get for a 2023 Volvo XC90?

asked by: John

0

Expert Reply:

I recommend using the 44" AirScreen XT # TH82WV if you have the OEM roof rack on your 2023 Volvo XC90 Recharge.

If you have an aftermarket roof rack then you'll want the smaller 38" AirScreen XT # TH72WV instead.

Attached is a review video for you to check out!

expert reply by: Jon G

0

Answer 1

Hey Kacey, I recommend going with the Rhino-Rack Fairing for Roof Racks #RRRF4. This fairing will clamp onto your crossbars, measures 50" long, and has rubber bumpers to prevent scratching your roof. How do you like your Volvo? I've heard…

view full answer...

Answer 2

Hello Alexander, For a wind fairing that is 44-46" long, I would go with the AirScreen XT #TH82WV. The #TH82WV is 44" long, and will work on your aftermarket aero style crossbars. What brand roof rack did you go with? What do you mainly use…

view full answer...

Answer 3

To pick out a fairing you need to measure the distance between the feet of the roof rack and go with one that fits the best between them. Below are the available sizes we offer that are for Thule bars and can fit other crossbars: #TH62WV for a 32…

view full answer...

Answer 4

Yes, the AirScreen XT for Thule Crossbars #TH22WV can safely sit on the sunroof glass on your 2023 BMW X7 M60i. It does not have issues with damaging paint and I would expect it to scratch up the paint on the roof before it would hurt glass. You can…

view full answer...

Answer 5

You will want to use the 38" Thule AirScreen XT #TH72WV on the roof of your 2019 Volvo XC90. This will fit with either the Thule roof racks below for your Volvo. If you have a different roof rack please let me know and I can help you find the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Thule AirScreen XT Fairing Recommendation for a 2023 Volvo XC90 Recharge

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching