Replacement Bearings for CE Smith Trailer Hub 13110
Updated 12/26/2022 | Published 12/25/2022
Products Featured in This Question
Question:
What wheel bearings kits is for a 13110 wheel hub ?
asked by: Justin G
0
Expert Reply:
For your trailer hub with 13110 on it the correct bearing kit would be the part # BK1-100 which comes with L44643 bearings.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Does Ducted Furrion Chill Cube With Heat Pump Include Remote
- Q&A: Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
- Q&A: Recommended Leaf Springs, U-Bolts, and Suspension Bolts for a 2,000 lbs 1-3/4" Diameter Axle
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Q&A: Double Lip Grease Seals to Replace Transcom Seal 12192TB
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub For BT-100 Trailer Idler Hub On a 1" Straight Spindle
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Best Boat Trailer Jacks
- Article: Trailer Tire Sizing