How Much Easier is the Fulton XLT 2-Speed Trailer Winch To Use Than a Standard Hand Crank Winch

Question

Question:

Hi. Yes, I know. It is difficult to quantify, just how much easier it is to crank 2-gear winch of the sort offered here than it is the standard Fulton winch I am presently using to load my 17 ft Bass Tracker. But this is the question I put to you because I broke my back in a car accident and struggle to use standard winch. Thanks!!!

asked by: Poche W

0

Expert Reply:

The Fulton XLT 2-Speed Trailer Winch part # F142425 as the title states has two speeds; a high speed which lets you retrieve your load much faster but it will be more strenuous and a low speed which makes it slower to retrieve your load but it will be much easier physically speaking. The low speed will be considerably easier to use than a standard single speed hand crank winch so as long as you are okay with the slower retrieval, you'll surely appreciate the mechanical advantage.

The other option if you have it in the budget is an electric winch which requires almost no physically effort with good speed, the Dutton-Lainson StrongArm Electric Winch part # DL25001.

expert reply by: Conner L

0

Answer 1

There are two schools of thought when it comes to determining the correct sized winch for a boat. The first being that the winch should be able to handle 3/4th of the total combined weight of the boat along with the motor, fuel and gear. The second…

view full answer...

Answer 2

The specs listed for the #KDBC225DAC Kodiak caliper I found online match up with those of the Reliable CL-1000. Either would be compatible with a 3500 to 6000 lb axle but because it hasn't been officially tested, If I were in your shoes I'd…

view full answer...

Answer 3

Based on my research, the Kodiak Disc Brake Caliper #KDBC225DAC should work perfectly as a replacement for the existing Reliable CL-1000 Calipers on your trailer. This hasn't been officially tested by the manufacturer but based on the specs they…

view full answer...

Answer 4

I have a solution for you, however, we do not carry a direct replacement for Reliable brake components. I recommend one of the Kodiak disc Brake Kits, like #K2HR526D. This kit includes 2- 12" brake rotors with 6 on 5-1/2 inch wheel bolt pattern…

view full answer...

Answer 5

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

view full answer...

Answer 6

The Dutton-Lainson StrongArm 12-Volt DC Electric Winch with Remote #DL25220 is an excellent option for your 2,500 lb boat. The 3,000 lb weight rating is for rolling loads, but this can actually handle up to a 9,000 lb boat, and since you have rollers…

view full answer...

Answer 7

For your 2007 Crest pontoon boat, I recommend using the Fulton XLT 2-Speed Trailer Winch #F142425. This is a top-of-the-line boat trailer winch, it has 2-speed gearing for faster retrieval, and a corrosion-resistant zinc finish and polypropylene…

view full answer...

Answer 8

I would easily recommend the Fulton F2 Fully Enclosed Trailer Winch with Adjustable Handle - 2,000 lbs #FW20000301 or the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap - Zinc - 2,600 lbs #F142418 as a replacement for your…

view full answer...

Answer 9

For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…

view full answer...

Answer 10

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

How Much Easier is the Fulton XLT 2-Speed Trailer Winch To Use Than a Standard Hand Crank Winch

Products Featured in This Question

Continue Researching