12 X 2 Right Hand Electric Trailer Drum Brake Assemblies For 7,000 Trailer Axle

Question

Question:

I need 2 assemblys for the right side I only see left/right in pairs or single left

asked by: Roland K

0

Expert Reply:

Here are the right hand electric drum brake assemblies we have for a 7,000lb axle.

Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs # 23-181
Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs # AKEBRK-6R
Electric Trailer Brake Assembly - Dacromet - 12" - Right Hand - 5,200 lbs to 7,000 lbs # AKEBRK-7R-D
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs # AKEBRK-7R-SA

expert reply by: Bud M

0

Answer 1

Hi Jason, In order to find the correct hub/drum for your M1101 trailer we'd need to first determine what your bearings and grease seal are and the axle capacity. If the other hub you have has anything stamped into it we can also try looking up…

view full answer...

Answer 2

Based on my research your M1101 trailer has a GVWR of around 3400lbs, so for a replacement axle I recommend taking a look at the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Off-Road Tires - 3,500 lbs #ASR35HDS01 which will…

view full answer...

Answer 3

Currently Dexter only offers either the Self-Adjusting Brakes #23-464-465 or Brakes With Parking Brake #23-112-113 which will fit your 1997 M1101 trailer. Both of these are sets of brakes for the left and right while the Drum #42866UC3 is offered as…

view full answer...

Answer 4

For your M101A1 Military trailer the parking brakes can be maintained when adding electric brakes when you use the Dexter Electric Trailer Brake Kit w/ Parking Brakes - 12" - Left and Right Hand Assemblies #23-112-113. These electric brake…

view full answer...

Answer 5

To replace a spindle, the old one would need to be cut off, and the new one welded into place. This is NOT a job for the do-it-yourselfer. The new spindle must be absolutely square with the axle in order to prevent premature tire wear and wheel…

view full answer...

Answer 6

You are correct, there are 4 electric over hydraulic braking systems, from 3 manufacturers, that can be used to eliminate the air over hydraulic actuator on your M200A1 trailer. These systems all require a breakaway system to meet DOT safety…

view full answer...

Answer 7

The etrailer brand #AKEBRK-35-SA 3.5K brake assemblies aren't compatible with parking brakes, but we do offer a 10 x 2-1/4 inch 3.5K brake assembly kit that is. You'll want to use the Dexter Axle #K23-086-087-00 brake assembly kit which…

view full answer...

Answer 8

My recommendation for the junction box is the Pollak 10 terminal Junction Box, #PK52248. This will give you individual terminals for your 8 contacts. I'd suggest using the other two for a hot supply line and a ground line so you can just add…

view full answer...

Answer 9

To answer your question yes, the Trailer Breakaway Kit Battery Charger part #20011 can be used to charge your breakaway battery while drawing power from the 12 volt auxiliary battery on your trailer. However, most local and state regulations require…

view full answer...

Answer 10

There is nothing wrong with using the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs #23-458 and #23-459 on your 2005 Forest River Wildcat 5th wheel trailer even though it has a 5200lb AL-KO axle. 5200-7000lb…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

I have another option for you, but unfortunately there is not a kit to add parking brakes to the Electric Trailer Brake Kit #AKEBRK-7-SA you were looking at. Instead I recommend the Dexter Electric Trailer Brake Assembly with Parking Brake - 12"…

view full answer...

12 X 2 Right Hand Electric Trailer Drum Brake Assemblies For 7,000 Trailer Axle

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching