Install Instructions for TracRac Ladder Rack Base Rails

Question

Question:

Do you have some instalation instructions? I need to remove and install some rails. Thanks

asked by: Tim

0

Expert Reply:

The base rails part # TH21610 are part of the TracRac Ladder Rack part # TH43002XT-610 which I attached a link to the install instructions for on this page.

expert reply by: Jameson C

0

Answer 1

Thule acquired TracRac a few years ago. As a result, Thule no longer sells product branded TracRac, it is branded Thule. From what I can tell, the model number 27000b is an older TracRac branded model. The Thule rep indicated that big box stores may…

view full answer...

Answer 2

Hey Alex, Thule unfortunately hasn't confirmed fitment of the TracRac SR on the 2024 Ford F-350 yet so I can't confirm the correct rails. I can say that the #TH21610 is for a short bed Toyota Tundra though. If you'd like to tell me more…

view full answer...

Answer 3

The TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs #TH43003XT-000 will work with the Back Revolver X2 #BAK39331, and that seems to use the same rails as the BakFlip #BAK48122 as well as others. I can't confirm a fit with anything other than…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Install Instructions for TracRac Ladder Rack Base Rails

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching