Width of Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars

Question

Question:

What is the width in mm of this product?

asked by: Scott B

0

Expert Reply:

The Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars part # RRM626 measures 7/8" wide at the top and 1/2" where it installs into the track. I have attached a photo below.

expert reply by: Conner L

0

Width of Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars
(click to enlarge)

Answer 1

You'll be able to use almost any replacement strip as they are almost always fit for a 3/8 inch channel. I specifically recommend the Thule Replacement Channel Cover 59 inch, part #852-5402-005 or the Rhino Rack Vortex 15-3/4, part #RRM626. These…

view full answer...

Answer 2

Thank you for pointing out that discrepancy. The Yakima SkyBox NX 16, part #Y95AV, does have a crossbar spread of 24" - 36". I will have this updated immediately. As for your crossbars, the distance used is the center to center. As such,…

view full answer...

Answer 3

Scott, it looks like you are correct, Thule does make the crossbars for Volvo's. Really you can use any rubber strip to replace the missing one, you'd just need to know the channel width. For instance if you needed a 3/4" wide strip,…

view full answer...

Answer 4

The Rhino-Rack Vortex crossbars that are designed to fit your 2019 Ford Edge are the 54" Crossbars #RRVA137B-2 (along with the 2500 Series Legs #RRRLKVA and Fit Kit #DK432). For the 54" bars your strip length measurement is 150mm. If…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

We sure do Billy and congrats on your new SUV. To add a hitch to your 2026 Mazda CX-50, I recommend our etrailer item #e55XV. This custom fit class III hitch has a 2" receiver, a 3,500 lbs towing capacity, and a maximum tongue weight of 525 lbs.…

view full answer...

Answer 10

Congrats on the new SUV Rene! For your 2025 Mazda CX-50, I recommend our etrailer Hitch item #e55XV. The only differences in the Curt Hitch item #C33MJ and our etrailer item #e55XV are the paint finish and the cost. Both hitches are custom fit for…

view full answer...

Width of Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching