What Size Guide Posts are the Replacement Mounting Hardware for CE Smith Roller Guide-On's For

Question

Question:

the square metal tubes for my guide posts are 1 1/2inch x 1 1/2inch do you have brackets for this size??

asked by: Michael A

0

Expert Reply:

The Replacement Mounting Hardware for CE Smith Roller-Style Guide-On part # CE11451-A is designed for use with 1-1/2" x 1-1/2" square tubing so it will work well with your guide-on posts.

expert reply by: Conner L

0

Answer 1

The Replacement Mounting Hardware for CE Smith Roller-Style Guide-On #CE11451-A only fits up to 4-1/4" tall and does have the 3-1/2" wide you need. If you add the CE Smith Extra-Long U-Bolt Kit for Boat Trailer Guide-Ons - Pre-Galvanized…

view full answer...

Answer 2

Hey Steven! The etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet #e93SR will be adequate for your 2020 Gulf Stream Vista Cruiser since the Dexter D40 number correlates to a 4,000 lbs hub and drum…

view full answer...

Answer 3

Hey Mark, thanks for the information. The highest capacity roller bunks we have are the 3,000 lbs Boat Trailer Standard Roller Bunks item #DL21755. The Tie Down Roller Bunks for Boat Trailers item #TD87FR, you were looking at, top out at 1,500 lbs.…

view full answer...

Answer 4

I wish I had an exact recommendation for you but the boat trailer guide ons, like part #CE27640, are really a personal preference. There are some general guidelines to follow but there aren't any standards. What you want to do is make sure your…

view full answer...

Answer 5

We don't carry the Calkin brand but we do have rollers. What type of roller are you looking for and what dimensions?

view full answer...

Answer 6

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Answer 7

Hello Johnny, thanks for reaching out. The bracket that goes with the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps CE19504-2 is our part number #PF1135-BKT-2. The brackets are 2-3/4" wide x 13-1/4" long. I have included a…

view full answer...

Answer 8

Since you have 14" diameter wheels you will want to use the CE Smith Single Axle Trailer Fenders #CE19504-2 that are designed for that size and have an inside length of 29-11/16". These fenders allow you to use your existing mounting…

view full answer...

What Size Guide Posts are the Replacement Mounting Hardware for CE Smith Roller Guide-On's For

Product Page this Question was Asked From

Continue Researching