Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use this hardware kit to mount your CE27610 roller guide-on on your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the replacement mounting hardware for CE Smith Roller-Style Guide-Ons. This hardware kit provides you with the items you need to replace the mounting hardware for your roller-style guide-ons on your boat trailer. The brackets are made from steel so they're very strong and durable. All the metal components have protective finishing on them to keep them safe from rust and corrosion.With this kit you get two pre-galvanized mounting brackets. You'll get two formed U-Bolts and two straight U-Bolts. You get two square caps, which insert into the top of each upright post.
And you get the required washers and locknuts for installation. Now, the brackets can be installed on top or underneath the trailer frame, whatever installation option works best for your application.The product is made in the USA. Few measurements to go over with you real quick, and then I'll show you the installation instructions. When it comes to these U-Bolts, the U-Bolts measure five inches from the bottom of this point here to the end of the threads, and then the distance between the posts, that's the threaded posts, looks to be about three and a half inches. That measurement was taken from inside edge to inside edge.
Each one would measure the same. When it comes to the brackets, these brackets measure about 4 5/8 inches long by 3 7/8 inches wide. Then the opening right here, that gives us a measurement of about 1 5/8 of an inch to 1 11/16 of an inch, right in that area.Again, really nice design, protective coating, keeps them safe from the elements. Right here's the installation instructions. I did mention that you have two form U-Bolts and two straight U-Bolts.
That's so that you can cross them like this application here. That's designed for two inch wide frames or you could run them straight like this one, which would be for a three inch wide frames. It does come with detailed installation instructions to walk you through the whole process step by step.That's going to do it for today's look at the replacement mounting hardware for CE Smith Roller-Style Guide-Ons.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Jenny N.
5/31/2023
I would say that it is not uncommon for the u bolts to be rusted. The zinc coating is thin and overtime will oxidize. It is recommended that they be primed and painted. You can remove the rust and use rust resistant paint to help protect it.
Brooke M.
6/18/2025
Salt water, eh? Doing some boating?
Dustin
5/16/2023
I have no idea. I sold the boat shortly after installing them.
Scuba K.
2/8/2019
They have been working great.
Al C.
7/12/2021
Just fine
Robert C.
1/29/2023
Still working great to help load our 18 Tracker Party Barge onto the trailer. In fact without them it would be very hard with any wind blowing at all!!
Richard
6/24/2019
Great
William
6/21/2020
Towed the boat all the way to Port Aransas Tx. No problems
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lingcod
4/2/2021
Solved my salty carpet and aluminum pitting problem and boat loads easy. Strong and well built, still solid