Will The Dexter D35 Axle With 89" Hub Face Work As a Replacement For a 88" Hub Face?
Published 10/08/2022 >
Products Featured in This Question
Question:
Hi. I need to replace my Dexter D35 axle. According to the tag, the hub face measurement is 88 inches, spring center is 74 inches. All I see online is hub face of 89 inches. Will the 89 inch work for me? Thanks.
asked by: WILLIAM J
Expert Reply:
By switching to one of the Dexter axles with the 89" hub face versus your 88" hub face it will only push the tires out 1/2" on each side. While this is typically not an issue for most trailers you will want to verify that it will not affect any of your tire clearances on your fenders. I have listed the Dexter axle options for you below.
Dexter Trailer Axle Beam with EZ-Lube Spindles # T3584F-EZ-8974
Dexter Trailer Axle w/ Idler Hubs # 35545I-EZ-89
Dexter Trailer Axle w/ Electric Brakes # 35545E-ST-89
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Video: All You Need to Know About the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: What is Difference Between 3,000 and 3,500 lb Trailer Brake Assembly
- Q&A: How Much Distance Should I Have Between The Tire And The Trailer Frame?
- Q&A: Can 3,500 Lb Hub be Used to Replace 2,000 Lb Hub with Same Size Bearings
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Article: How to Raise Your Travel Trailer Height
- Q&A: How to Determine Correct Hub Replacement for 1994 Jayco Eagle SD with Dexter Axle
- Q&A: Do I Need Additional Fuses for the Main Fuse Box on a 2024 Honda Pilot to Power a Wiring Harness?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Is there a Brake Mounting Flange for a Square 3500 Pound Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs

