Complete Disc Brake Conversion Kit For A Tandem 10,000 Pound Dexter Axle
Updated 09/20/2022 | Published 09/19/2022
Products Featured in This Question
Question:
Do you offer a complete hydraulic conversion kit for 10k dexter / lippert axles or have any of the components, ie backing plates with shoes and wheel cylinders or line kits. I see you have the 1600 psi hydrastar pumps. My trailers have 2 axles each.
asked by: Thomas F
Expert Reply:
Though we do not sell complete conversion kits with all the necessary parts to convert to disc brakes, we do have all the parts to put it together for your 10,000 pound Dexter axle we have a couple options.
The first option is the Kodiak Disc Brake Kit # K2R1058D11E. This kit is designed for Dexter axles with oil bath hubs that are made after May 2013. The second option is the # K2R1058D11HD. This kit is made for axles prior to 2009. Both systems mentioned are slip-on-over-the-hub rotors. If you're having trouble removing your current hub from the drum you can use The Trailer Idler Hub Assembly for 10,000 pound axles # 8-214-5 or # 8-214-5UC1. This will provide you with new bearings, seals, and races.
The Hydrastar Electric Over Hydraulic Actuator for Disc Brakes # HBA16 has electronic, proportional pressure valves that will ensure that the braking is smooth and effective. It also has a built-in bleeder screw that lets you easily flush air out of the brake lines. The Brake Line Kit # 24TA-BLKIT will run brake fluid from your surge brake actuator to your trailer brakes.
Finally a breakaway kit # 3802308 and controller # RED44FR are needed to complete the installation.
I attached some review videos and helpful links below.
Product Page this Question was Asked From
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Boat Trailer
- Travel Trailer
- Disc Brakes
- Hydrastar
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - Dacromet - Leaf Spring - 10K Rockwell
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: Review of Dexter Axle Trailer Brakes - Replacement Caliper Reataining Bolt - BP18-105
- Video: Detailed Breakdown of the Replacement 11" Rotor for Dexter Disc Brakes
- Video: The Low-Down on the Replacement Anchor Yoke Assembly for Dexter Disc Brake
- Shop: Trailer Idler Hub Assembly for 10,000-lb Axles - 8 on 6-1/2
- Search Results: disk brake kits
- Search Results: 8~214
- Search Results: trailer hubs and drums
- Search Results: 025~014~00
- Search Results: standard equalizer trailer suspension parts
- Shop: Hydrastar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes - 1,600 psi
- Shop: Replacement 11" Rotor for Dexter Disc Brakes - 8 on 6-1/2" - 10,000 lbs or 12,000 lbs
- Shop: Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Replacement Caliper Retaining Shoulder Bolt for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Shop: Trailer Wiring
- Search Results: adapter 7 flat to 7 round
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Video: All You Need to Know About the Kodiak Disc Brakes
- Shop: Brake Controller
- Video: Review of the Dexter Trailer Idler Hub Assembly for 10,000-lb Axles
- Search Results: marker lights
- Q&A: Parts Needed to Connect Gooseneck Trailer to Semi-Truck 7 Pole Round Plug
- Q&A: Recommended Wiring for Semi Tractor to Tow Gooseneck Trailer
- Video: All You Need to Know About the Gooseneck to 5th Wheel Trailer Coupler Adapter
- Q&A: Solution to Convert Gooseneck Trailer Coupler to Fifth Wheel King Pin
- Q&A: Parts Needed To Pull A Gooseneck Trailer Behind a 2007 Kenworth T800
- Q&A: Best Way to Convert Lippert 10K Axles to Disc Brakes
- Q&A: How To Convert Dexter Electric Drum Brakes to Hydraulic Disc Brakes on 10K Axle