Wall-Mount Thermostat Compatible with Advent Air RV Air Conditioner ACM135

Question

Question:

Hello, I have an advent ACM135 unit what kind of wall mount thermostat can I use on this unit?

asked by: Albert M

0

Expert Reply:

To add a wall-mount thermostat to your Advent Air RV Air Conditioner # ACM135 you'll need the Air Distribution Box w/ Wall-Mounted Thermostat # ACRG15. This is a kit is the only way to get that thermostat aside from purchasing a whole new AC system that would come kitted with the thermostat.

expert reply by: Jon G

0

Answer 1

Yes, the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners #ACRG15 is what you need for your application. This includes a new thermostat as well. According to my research all of the wiring for your current thermostat…

view full answer...

Answer 2

If you have the ACTH12 then you should also have the Air Distribution Box #ACRG15 which will have a control box for your wiring from the rooftop unit #ACM135 and the thermostat. This air distribution box and thermostat will wire up exactly the same…

view full answer...

Answer 3

The Advent Air Replacement RV Air Conditioner for Carrier Setup part #ACCAR135 is designed to be used to replace a Carrier RV Air Conditioner. Therefore, it would re-use the Carrier RV Air Conditioner ceiling assembly. If you don't have a Carrier…

view full answer...

Answer 4

Hi Jim, If you're wanting to replace just the rooftop unit then you'll first want to remove the cover of your air distribution box to take a look at the controller. The controller will have a wire harness that hangs down from the rooftop unit…

view full answer...

Answer 5

I recommend replacing your 57915.331 Duo Therm Dometic AC unit with a 13.5K Btu Advent Air AC unit which comes in the following colors: - Black #ACDOM135B - White #ACDOM135 These come with a plug and play wiring harness so the installation is pretty…

view full answer...

Answer 6

Hey Rocky, The A and B wires for the thermostat are just both labeled as "Data Communication". The relay (controller) #PXXACRG12RB for the #ACRG15 would have a blue 22AWG wire for A and purple 22AWG wire for B. If you're reusing the…

view full answer...

Answer 7

Advent Air Conditioners like part #ACM135 come with a connector that pairs up directly with the standard 6-wire connector. If you have a 9-wire connector then you need the kit #ACRG15 as well. For wiring I'm attaching some photos of diagrams for…

view full answer...

Answer 8

The Furrion AC units like the 13,500 Btu #FR26PR or the 15,000 Btu #FR58PR are not compatible with your old thermostat. You will instead need to use a Furrion thermostat like the Wall Thermostat for Furrion Chill RV Air Conditioner - Single Zone -…

view full answer...

Answer 9

If your Dometic Penguin has either a 6-pin or 9-pin connector you can replace the rooftop unit without having to replace the air distribution box or thermostat. If you remove the cover for your air distribution box then you should be able to see the…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Wall-Mount Thermostat Compatible with Advent Air RV Air Conditioner ACM135

Continue Researching