Parts Needed to Flat Tow 2007 Jeep Wrangler Sahara With 2003 Winnebago Minnie Winnie 29B

Updated 09/06/2022 | Published 09/02/2022

Products Featured in This Question

Roadmaster Tow Defender Protective Screen for Towed Vehicles

(210)

$615.00

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3343)

$575.00

Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide

(566)

$424.59

Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(141)

$165.46

Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional

(314)

$1473.76

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors

(3197)

$100.94

Roadmaster 64" Single Hook, Straight Safety Cables - 8,000 lbs

(353)

$64.95

Roadmaster Battery Disconnect for Towed Vehicle w/ Flat Tow Brake System - Gas Only

(375)

$209.36

12 Volt Outlet Kit, 20 amps

(331)

$41.79

Question:

Hi, I have a 2003 Winnebago Minnie Winnie 29B and a stock 2007 Jeep Wrangler Sahara. I am wondering what all I need to be able to flat tow my Jeep with the motorhome?

asked by: Doug

Expert Reply:

In order to flat tow your 2007 Jeep Wrangler Sahara you will need a base plate kit, tow bar, safety cables, wiring, and a supplemental braking system. I recommend the following for a complete setup:

-Roadmaster Direct-Connect Base Plate Kit # 1429-3

-Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522

-Roadmaster 64" Single Hook, Straight Safety Cables # RM-645

-Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154

-Brake Buddy Select 3 Portable Supplemental Braking System # HM39524

You will also need the Roadmaster 12 Volt Outlet Kit part # RM-9332 along with a battery disconnect # RM-766. This setup will also be compatible with the # RM-4750 you looked at if you want the additional protection for your Jeep. If your Winnebago doesn't have a hitch and wiring you will also need the following:

-Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704

-4-Pole Hardwire Kit with Circuit Tester # 18252 (If you have a combined tail light wiring system)

-Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496 (If you have a separate tail light wiring system)

You will have to determine if you have a combined or separate system to choose the correct wiring harness. It is also likely you will need a high-low adapter. See the attached articles below on how to determine what you need. I have attached a link to all of our high-low adapters for your reference.