Reese Goosebox 20k Zerk Fitting Replacement

Question

Question:

I recently purchased a 20k Reese Goosebox from you. While being serviced the grease zerk was broken off. Can you tell me what size grease fitting this is? Thanks

asked by: Don P

0

Expert Reply:

For your Reese Goose Box the grease fitting is a standard grease zerk. You can use # GZERK as a replacement. The threading of the zerk is 1/4-28.

expert reply by: Jameson C

0

Answer 1

I checked directly with Dexter, and from what I saw they have a measurement - taken from center of spring eye to center of spring eye - of 24.8", which is the same as our 24-7/8" measurement for the 7-Leaf Double-Eye Spring for 8,000-lb…

view full answer...

Answer 2

The Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2580 will indeed work on 7,000 lb axles. The leaf springs would just be slightly overrated for what you need but there will be no problems with compatibility. It does require that…

view full answer...

Answer 3

Hey Kyle, We do! What you're looking for is the U-Bolt Kit #APUBR-9 which comes with 7-1/16" long U-Bolts that are 3" wide on the inside so they'll work perfect for you!

view full answer...

Answer 4

Everything I can find on that part number indicates it is from a Carefree awning. We only have replacement struts for Lippert awnings which are #LC260282 and #LC280343. I would try checking with Carefree to see if a replacement is available. If not,…

view full answer...

Answer 5

First I want to make sure you are using the correct opening on the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP85FR. In the image below the correct opening is the lower cap below the blue portion. This is the correct connection…

view full answer...

Answer 6

For your Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs #RP94720 you will need the Air System Service Kit for Reese Goose Box 5th Wheel to Gooseneck Air Ride Coupler Adapter #RP86007 which will…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 12

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Reese Goosebox 20k Zerk Fitting Replacement

Products Featured in This Question

Continue Researching