Fit Of An Antenna Extender For The VueSMART RV Backup Camera

Question

Question:

Will this for the Hopkins View Smart wireless back up camera that you also sell?

asked by: Rick B

0

Expert Reply:

Yes, the Antenna Extension for Voyager Digital Wireless System # WVOSAPANTEXT is compatible with the:

-VueSMART RV and Trailer Backup Camera # HM34FR that you mention as they both use the same coax connection.

This kit includes a mounting bracket, an antenna, and a 10' cable as well.

expert reply by: Bryce D

0

Answer 1

Hey John, welcome back. The VueSMART RV and Trailer Backup Camera item #HM34FR is going to be operated by the Hopkins Towing Solutions mobile app through your phone's WiFi network. The camera creates its own local WiFi hotspot, which connects…

view full answer...

Answer 2

The marker and clearance lights you have now ground with a single wire hence why you have two wires total, one for power and one for ground. If the marker or clearance light only has one wire then this wire is for power and the light grounds though…

view full answer...

Answer 3

To connect to the WiFi on the VueSMART RV and Trailer Backup Camera #HM34FR you will need to register the product through the Hopkins Towing Solution App and then you'll be able to connect to the VueSMART by using the password…

view full answer...

Answer 4

Hey Matt! Thanks for the picture and welcome back! I am sorry but I do not have any videos of the EcoHitch Hidden Front Hitch item #EH25HR being installed let alone a detailed one like you're requesting. That looks like chrome plated plastic.

view full answer...

Answer 5

Hi Timothy; for your 2022 Chevy Silverado 1500 diesel we have the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. This is the only front hitch without the diesel restriction.

view full answer...

Answer 6

We carry the Timbren Axle-Less System rated at 5,200 lbs part #ASR5200S01. The axle-less system mounts to your trailer frame and takes the place of your old axle and springs.#ASR5200S01 is a straight spindle design. Timbren also offers these axles…

view full answer...

Answer 7

Only a 7-way trailer connector will have a 12-volt power wire ran to the connector. A 4-way trailer connector will not have a constant 12-volt power wire. As long as the 12-volt power wire running to the 7-way trailer connector is rated for the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Fit Of An Antenna Extender For The VueSMART RV Backup Camera

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching