Recommended Ball Mount For Towing a U-Haul Trailer With a Vehicle Receiver Height of 23"
Updated 08/22/2022 | Published 08/19/2022 >
Question:
The trailer receiver in my suv is 23” tall. The uhaul trailer I will be pulling in a few months are said to be 18.5” tall. The trailer 5’x8’ will have about 500 pounds of equipment in it and I will be driving about 600 miles with it. Would I be ok with a hitch that has only a 2 inch drop or should I buy something to make it as level as possible. Is making the trailer level more important with heavy loads or is it something to always pay attention to? Thanks
asked by: Jason S
Expert Reply:
I recommend using the Curt Fusion Ball Mount # C45154 for towing the U-Haul trailer with your SUV. This ball mount has a 4" drop to help level the trailer. It is important to level the trailer as best as possible when towing. Having the trailer level will help reduce the chances of the contents moving around and will help prevent damage to the trailer if the rear of the trailer is to close to the ground. It can also prevent you from being able to back into some driveways on hills if the rear of the trailer is too low.
Product Page this Question was Asked From
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- One Ball
- 2 Inch Ball
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Hub and Drum assembly for ALKO 8480
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Picking Between Bulldog Winch Shackles BDW20310 BDW26FR and BDW20311
- Q&A: Does The Draw-Tite Class III Hitch # 75699 Fit Under The Bumper On A 2011 Jeep Grand Cherokee
- Q&A: Solution for Carrying Motorcycle With 2013 Honda CR-Z
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Is Curt Ball Mount C45064 Class III
- Article: How Much Trailer Can I Really Tow
- Q&A: Grease Seal With 1.71 Inner Diameter, 2.62 Outer Diameter With Bearings LM48548 & L44649
- Q&A: Best Trailer Hitch Ball Mount For A Trailer That Sits 4" Lower Than Truck's Receiver
- Article: Determining Trailer Tongue Weight
- Article: Gooseneck to 5th Wheel Adapters
- Article: Slipper Spring Trailer Suspension System Review

