Replacement Tire For A Taskmaster 4.80-12 Tire And Rim

Updated 07/05/2022 | Published 07/03/2022

Products Featured in This Question

Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C

(7772)

$82.66

Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C

(7772)

$80.33

Question:

Hi, i want to change the original tire and rim on my single-axle, Load-Rite trailer to a tire with larger, triangular holes in the rim. I want to be able to slip a security chain through the holes in the rim. The original tire is: Taskmaster 4.80-12 rim 3.75 no. 03 80 m 81 mph 6 P.R. nylon cord Load range C tubeless Max. load 990 lbs @ 90 psi cold Tread 4 plys Sidewall 2 plys Bolt Pattern 5 x 4 1/2 I would like to purchase the Loadstar 4.80-12 Bias Trailer Tire with 12inch Galvanized Wheel - 5 on 4-1/2 - Load Range C Item # AM30670. Will this tire and rim be compatible with the other original tire and rim on my trailer or would you recommend something else? Loadstar 4.80-12 Bias Trailer Tire Rim dimensions: 12inch diameter x 4inch wide Bolt pattern: 5 on 4-1/2 Wheel capacity: 1,250 lbs Wheel bolt size: 1/2-20 Pilot diameter: 3.19 Offset: 0 Tire size: 4.80-12 Section width: 4.9 Outer diameter when inflated: 20.7 Tire capacity: Load range: C Ply rating: 6 Maximum load: 990 lbs at 90 psi Warranty: 5-Year on tire Limited 2-year on wheel

asked by: Bob

Expert Reply:

When it comes to replacing your Taskmaster 4.80-12 tire and rim The Loadstar 4.80-12 Bias Trailer Tire with 12 inch Galvanized Wheel - 5 on 4-1/2 - Load Range C # AM30670 would be a good replacement.

The Loadstar wheel has a ply rating of 6, and has a maximum load rating of 990 pounds at 90 psi. The rim has a capacity of 1,250 pounds. The rim has a 8-spoke steel wheel which is galvanized which will help resist rust.

I attached a review video link below.

expert reply by: Noah E