We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13052

33 Reviews | 6 Questions

In Stock

$207.69

Retail:$326.95

You Save: $119.26

Not Confirmed to Fit

2011 Toyota Camry

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch receiver - custom fit class iii 2 inch

curt trailer hitch for towing receiver - custom fit class iii 2 inch

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

2010 land rover lr2 trailer hitch curt for towing receiver - custom fit class iii 2 inch

2010 land rover lr2 trailer hitch curt c13052

2010 land rover lr2 trailer hitch curt for towing class iii on a vehicle

2010 land rover lr2 trailer hitch curt class iii c13052

2010 land rover lr2 trailer hitch curt for towing on a vehicle

2010 land rover lr2 trailer hitch curt class iii on a vehicle

2010 land rover lr2 trailer hitch curt for towing class iii receiver - custom fit 2 inch

2010 land rover lr2 trailer hitch curt for towing c13052

Show All (10) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" customer photo

Show All (1) Customer Images

Show Fewer Customer Images

Videos

Installing the Curt Trailer Hitch Receiver on your 2010 Land Rover LR2

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13052 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (33)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - C13052

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Standard 2" Receiver: Works with ball mounts, bike racks, and Class III accessories
Tows up to 4,000 lbs (GTW): Handles small trailers, boats, and light campers safely
Holds up to 400 lbs (TW): Supports cargo carriers or tongue load without flexing
Bolt-On Installation: Mounts directly to frame using included hardware—no welding needed
Gloss Black Powder Coat: Dual-layer protective finish resists rust and corrosion over time

Features to know about

Haul Your Gear with Confidence: Class III Strength and 2" Receiver

This hitch has a 2" x 2" receiver opening rated for a maximum gross trailer weight of 4,000 lbs and a maximum tongue weight of 400 lbs. It’s a solid, fully welded piece built for small trailers, bike racks, or cargo carriers. The Class III rating gives you the strength to tow confidently without worrying about flex or weak points.

Built to Last on the Road: Powder-Coated, Corrosion-Resistant Steel

The hitch is made from sturdy steel with a gloss black powder coat finish layered over a protective base coat for superior rust resistance. It stands up to wet weather and road grime while keeping a clean, finished look. The round-tube design adds both style and durability under the bumper so it looks as good as it performs.

DIY-Friendly Installation: Bolt-On Mount with Included Hardware

You don’t need specialized tools or welding gear to install this hitch. It bolts directly to the vehicle’s frame using the included hardware kit and step-by-step instructions. The precision, robotic welding ensures everything lines up right, making it straightforward for do-it-yourselfers working in their driveway or garage.

Specs

Receiver Opening

Receiver opening: 2" x 2"

Class Rating

Rating: Class III

Weight and Capacity

Maximum gross trailer weight: 4,000 lbs
Maximum GTW when used with weight distribution: 4,000 lbs
Maximum tongue weight: 400 lbs
Maximum TW when used with weight distribution: 400 lbs

Warranty

Limited lifetime warranty

13052 Curt Class 3 Trailer Hitch Receiver

Compare to Draw-Tite 75688

Installation Details C13052 Installation instructions

This Product Fits The Following Vehicles

2008 - 2015 Land Rover LR2

4.8

33 reviews

5 Stars		(28)
4 Stars		(3)
3 Stars		(2)
2 Stars		(0)
1 Star		(0)

by: Robert T 12/21/2022

I was surprised how well the Curt Trailer Hitch fit on my 2008 Land Rover LR-2. The instructions were clear and everything just bolted right on. I had a little help from a friend but one person could probably install it quite easily. We didn't even need to lift the vehicle. It is a great design and a great fit. Purchased and installedDecember 2022.

Click to Enlarge

by: Howard and Arthur Hatch 08/28/2026

2008 Land Rover LR2

perfect fit and very well built!! Will definitely use your company again in the future

by: Liam 06/06/2026

Fast delivery, quality equipment, reasonable prices all with a knowledgable and concerned staff with make sure you have what you need and that everything arrived as promised.

by: David 07/19/2021 One Year Later

The bolts were too long to tighten the n all the way. Only used for a bike rack so I never bothered fixing. The hitch seemed good just didn't have the correct bolts.

Sierra K.

7/22/2021

Thank you for your review. On the passenger side you use the smaller bolts. You will need to torque the M14 hardware to 126 ft lbs and 7 sixteenth hardware to 70 ft lb. Please watch this install video:

Helpful Links

tv-install-trailer-hitch-2010-land-rover-lr2-c13052.aspx

by: Ned 06/30/2015

The hitch is fine and order and delivery was easy and prompt but it was not as simple going on as other reviews made it appear. I'm pretty competent with tools and working on my cars and it could have been a bad day, but after I put in the driver side bolt and went to the passenger side I thought I was ok but the bracket on the hitch ended on the outside of the bracket on the frame I had to use a pry bar to move it to the inside. I'm not sure why inch and 1/2 bolts are supplied as 1 inch would be fine and I had to use a deep socket on the nut because the bolt stuck out so much. On the bolt nearest the tow eye the washer was just a little too large and ended up at an angle because it hit the tow eye and wouldn't slide flush. Lastly, the hitch is angled up and touches the body cover under the bumper. A bit less angle would have cleared. All in all a 30 min job was closer to 2 hours after doing and undoing to get things acceptable.

by: Kurt 06/18/2020

2012 Land Rover LR2

I purchased this hitch for my wife's 2012 Lr2 Land Rover. I had gone to our local trailer hitch dealer and For the same hitch I purchased at etrailer they were going to charge me twice the amount, plus 200.00 to install. I have 7 vertebrae fused in my neck, and I was able to easily install the hitch to her car.

by: Mark 04/05/2020 One Year Later

Excellent trailer, install was precise and straightforward. I've used the hitch to tow a motorcycle trailer over 30 times in the past year and it's worked like a champ. Highly recommend.

by: Joel J 06/10/2013

Product delivered in 4 days from order date. Package carton was damaged and one side of hitch was protruding through box. Nice job of packaging hardware and accessories taped to hitch or likely would have been lost out of carton hole. Hitch undamaged and installed in 15 min. (No kidding). Don't recall ever having an install this easy and strait forward. Overall great product and service.

by: Reinaldo 04/01/2013

What a great buying experience!! e-Trailer followed up on every step of the process. The hitch looks great and everything fit just like they said it would. Every buying experience should be like this!!!

I'll definitely be coming back for a bike rack.

Thanks.

by: Andy 07/27/2023 One Year Later

Great hitch, easy to install. We had a question during installation and etrailer provided prompt response. We would highly recommend etrailer.

by: Sam O 05/06/2014

2013 Land Rover LR2

Quick install on a 2013 LR2. Required no drilling, but a bit of a tight squeeze on some of the bolts & nuts.

Much easier than the factory hitch (which requires removing the bumper and cutting the facia).

by: John 03/20/2021 One Year Later

An easy installation, accomplished alone (by a non-mechanic), in less than 30 minutes, with no need to jack up the car or to remove other parts/pieces. A very sturdy and well thought out product.

by: Bob M 08/17/2016 One Year Later

Land Rover LR2

Very easy installation for a Land Rover LR2, in fact, easier than planned. to date it has only been used it for light loads, but it works great.

by: T.S. 06/05/2015

Land Rover LR2

The Curt hitch fit our LR2 perfectly. DIY install in under 2 hours. Very satisfied customer!

by: Cricket I 05/05/2019 One Year Later

Easy to install with the included instruction. Start to finish to about an hour.

by: Jeremy 02/28/2017

2008 Land Rover LR2

Received hitch days after ordering and was able to install hitch in 30 minutes

by: Rich 09/27/2015

Hitch was on in no time. Wiring was a different story.

by: Teresa 09/19/2023

2008 Land Rover LR2

Hello I received the product I didn't install yet but your service was amazing thanks for your faster shipping and service

by: Juan 04/17/2021 One Year Later

Receiver was a perfect fit and installed in just a few minutes.

by: George J 03/01/2017

2015 Land Rover LR2

Everything looks good. Readying the installation. I will keep you posted! Thanx Dave

by: Santos 07/25/2022

I am very happy with my order.
Great Personal and delivered on time!
Great price!!

Thank you all!
I Highly recommend!!

by: Keith R 12/22/2014

2010 Land Rover LR2

Installation was a breeze.

by: Ian 08/09/2020

Nice quality and easy to install (even during a blackout) :)

by: Sean 07/15/2020

excellent, good quality hitch, bolted right up with no problems. thank you

by: JRN 10/06/2016

Quick and free delivery as promised! Product as advertised and easy to install. As far as my experience a very good company to do future business with!

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Recommended Option to Carry Bikes and Skis on 2008 Land Rover LR2 HSE
To haul bikes as well as your skis and snowboard on your 2008 Land Rover LR2 HSE, there is one great option, starting with a hitch. For a trailer hitch use the Curt Trailer Hitch # C13052 because it has the most bumper clearance for use with a bike rack. This is a Class III, 2 inch hitch which is a bolt-on installation so no drilling will be required to install it on your Land Rover; the hitch is made in the USA and comes with a lifetime warranty. I have added a photo for you to take a...
view full answer...
Correct Hitch Receiver and Capacity for a 2016 Land Rover LR4
You need the Curt Trailer Hitch Receiver item # 13456 for your 2016 Land Rover LR4. The Curt Trailer Hitch Receiver item # C13052 does not fit your vehicle. It is for a 2008 - 2015 Land Rover LR2. The Curt Trailer Hitch Receiver item # 13456 is a confirmed fit for 2016 Land Rover LR4. It bolts to your frame with included hardware. It has a maximum gross trailer weight of 6,000 lbs which jumps up to 8,000 lbs when you use a weight distribution system. It has a maximum tongue weight of 600...
view full answer...
Distance Between Hitch Pin Hole and Rear Bumper When # C13052 is Installed on 2011 Land Rover LR2
When we do an install video, we will typically get the measurement you are looking for. Unfortunately, we have not yet had the opportunity to install a hitch on a 2011 Land Rover LR2. With high hopes I called Curt hoping that they would be able to provide that dimension, but they do not measure that dimension during their test fits. This being said, Curt was able to provide me with some dimensions that we can use to approximate the distance. All is not lost if you are willing to crawl...
view full answer...
Recommended Trailer Hitch And Trailer Wiring For 2008 Land Rover LR2
The Curt Trailer Hitch Receiver, part # C13052 is a verified as a good fit for your 2008 Land Rover. This is a Class lll hitch and it has a 2 inch receiver opening. The Euro ball mounts we offer are not designed for a 2 inch receiver. They fit 1-1/4 inch receiver openings. You might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball,...
view full answer...
Will the Thule Hitch Post Trailer Hitch Mount Bike Rack Fit a 2011 Land Rover LR2 with Curt Hitch
Once installed the Curt trailer hitch # C13052 will have the receiver recessed under your 2011 Land Rover LR2. We have yet to install one on a Land Rover so I do not know the exact figure but based on the diagrams of similar hitches installed it appears that it would be too far for the old Hitching Post bike racks to clear the rear bumper. What you can do is follow the instructions in the picture I have included to determine where the center of the hitch pin hole will be once the hitch...
view full answer...
Recommendation for Getting Last Hitch Install Bolt Lined Up
What you will want to do is loosely install all of the bolts that currently are holding the hitch to your vehicle. With the bolts loose you should be able to position the hitch so that you can get that last bolt started. I can't recommend you use a smaller diameter bolt for installing the hitch as that would void the warranty.
view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Jeffrey L

Written by:

Lindsey S

Video Edited:

Jacob T

Test Fit:

Randy B

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Isabelle B

Video by:

Zach D

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.