Determining Which Wall Clip You Need

Question

Question:

How do you determine whether you need thin or thick wall clips?

asked by: Linda C

0

Expert Reply:

When it comes to installing wall clips in your 2013 Itasca Navion Motorhome the difference between the thin or thick wall clips is how thick the walls are in your motorhome.

The Refrigerator Vent Latches - Thin Wall - Qty 2 # 372235 work with walls up to 1/16 inches thick.
The Refrigerator Vent Latches - Thick Wall - Qty 2 # 372245 work with walls up to 3/16 inches thick.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

The difference between the Thin Wall #372235 and Thick Wall #372245 refrigerator vent latches has to do with the recess in the clip themselves. The thin wall clips are designed for walls up to 1/16" thick which is generally your sheet metal…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hey Joseph! That is a 3,500 lb Lippert axle so you can use the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle #BK2-100. If you prefer a Timken kit made in the USA the #TMK52VR is also available. Both come with…

view full answer...

Answer 7

When replacing shackle straps they should be the same length as the ones that were previously on your tandem axle trailer (if possible); replacing them with longer straps will result in additional play in your trailer suspension which could lead to…

view full answer...

Answer 8

MORryde does have a suspension upgrade kit that I highly recommend. It comes with 1/2" thick shackles, along with wet bolts and bronze bushings. You will want to choose a kit based on the length of your current shackles. For 2-1/4" you need…

view full answer...

Answer 9

Hey Jason, it's pretty common for replacement leaf springs to be slightly shorter than what they replace as springs tend to stretch/flatten overtime as they wear out so while you are on the right track 3/4 of an inch is a bit too much of a…

view full answer...

Answer 10

Since you mentioned that you broke a leaf spring and not the axle, in order to determine which replacement leaf springs you'll need for your 2017 Keystone Bullet Premier Ultra Lite Travel Trailer you will need to measure your current springs from…

view full answer...

Answer 11

Stuart, since you’ve already confirmed the truck and trailer wiring through the junction box and verified the grounds, the fact that the running lights, brake lights, backup lights, and turn signals all work individually points us toward the tail…

view full answer...

Determining Which Wall Clip You Need

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching