What are Cannister Dimensions of RetraxPRO MX Tonneau Cover

Question

Question:

What are the dimensions of the concealed part of the unit that is in the bed of the truck? Trying to determine how much space it takes up at the front end of the truck bed. Also trying to determine how much depth I have below that rollup canister to the bottom of the bed. This is for 2019 Ford F450…long bed

asked by: John K

0

Expert Reply:

The cannister dimensions of Retrax PRO MX tonneau covers like the part # RT80384 that you referenced are 11-5/8 inches tall by 13-3/4 inches front to back.

expert reply by: Jameson C

0

Retrax Cannister Dimensions
(click to enlarge)

Answer 1

The back portion of the UWS Secure Lock Truck Bed Chest #UWS08298 is 12-1/2" tall and the canister for the RetraxPRO MX Hard Tonneau Cover #RT80384 is going to sit 11-5/8" down from the top of the bedrails. From what I can find online a…

view full answer...

Answer 2

I took a look at the installation for your Ultra-Flex Tri-Fold on your 2017 Chevrolet Silverado 3500 and it looks like it completely covers the sides of your bed rails where the TruXedo Truck Luggage Expedition Truck Bed Cargo Management System…

view full answer...

Answer 3

Not that one Scott, but I have one that will. The UWS Truck Bed Fender Well Toolbox item #UWS01624 is too tall at 23-1/4". To keep below your bedsides you'll need to use the DeeZee Specialty Series Passenger's-Side Wheel Well Tool Box…

view full answer...

Answer 4

The BAKBox 2 Collapsible Truck Bed Toolbox #BAKBX92333 is designed to work with rails on the BAK Revolver X2/X4s, Roll-X (discontinued), and BAKFlip tonneau covers. Although the BAKBox 2 has not been tested for compatibility with the RetraxPRO MX…

view full answer...

Answer 5

The toolbox that I recommend using with the RetraxPRO MX Hard Tonneau Cover #RT80384 on your 2019 Ford F-350 Super Duty is the UWS Truck Bed Chest - Wedge Series #UWS01032 as it will butt up next to the canister for your cover and the wedge design…

view full answer...

Answer 6

I checked with DeeZee and was able to confirm that the Red Label 5th Wheel Toolbox #DZ43200 you referenced is only a fit for the Ford Super Duty Trucks up through the 2010 model year so it will not work on your 2015 F-350. This is due to a slight…

view full answer...

Answer 7

For your 2024 Ford F-350 long bed the Pace Edwards Switchblade that fits is the part #PE66QJ and the dimensions of the roller canister is 9-1/4 inches tall by 9-3/4 inches deep.

view full answer...

Answer 8

Hello Dennie, The RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black #RT80384 is for Ford trucks. For your 2016 Ram 1500 with 8' bed you will want the RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black…

view full answer...

Answer 9

I would be happy to help you. The RetraxPRO XR Hard Tonneau Cover item #RTT-80384 is the correct tonneau cover for the 8 foot bed model 2022 Ford F-350. I recommend the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers…

view full answer...

Answer 10

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

view full answer...

Answer 11

Per TruXedo, the rails of the TruXedo Sentry CT Hard Tonneau Cover #TX1579616 are going to protrude 3" into the bed from the edge of the bedrails on both sides.

view full answer...

Answer 12

The BAK Revolver X4s Hard Tonneau Cover, short bed #BAK99ZR or long bed #BAK49ZR, measures about 8" when rolled up. It doesn't roll up completely up to the front so it will probably hang over the bed about 9" or 10" so you'll…

view full answer...

What are Cannister Dimensions of RetraxPRO MX Tonneau Cover

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching